Mtd Cub Cadet White 310-800A Snow Blower Thrower Parts
The MTD, Cub Cadet, and White 310-800A series snow blowers, produced over a significant period, were popular for their robust gas engines and efficient snow clearing capabilities. Typically featuring a 24-26 inch clearing width and a two-stage design, these machines were designed to tackle moderate to heavy snowfall in residential and commercial settings. Their reliability and ease of use contributed to their widespread adoption for seasonal snow removal tasks.
The MTD, Cub Cadet, and White 310-800A series represents a line of snow blowers built for durable performance and reliability. Production spanned multiple years, making them a common sight in many garages and maintenance sheds. These models are typically powered by a Tecumseh or Briggs & Stratton gas engine, with horsepower ranging from 5-8 HP depending on the specific sub-model. Some versions included an electric start option for easier starting in cold conditions. The 310-800A series is generally a two-stage snow blower. A robust auger system breaks up the snow, feeding it into a high-speed impeller that discharges it through the chute. Clearing widths vary, but are most often between 24 and 26 inches with an intake height of around 20-21 inches. This allows it to handle substantial snow drifts. Throwing distance can reach up to 30-40 feet, depending on snow conditions and engine power. The drive system is wheel-driven, offering multiple forward and reverse speeds to adjust to varying snow depths and terrain. Chute control is typically manual, allowing the operator to direct the snow stream. Many models featured a headlight for improved visibility during early morning or late evening snow removal. While heated grips were not standard, some aftermarket options may have been installed. The MTD, Cub Cadet, and White 310-800A series are best suited for medium to large driveways and walkways, handling both moderate and heavy snowfalls effectively.
Specifications
| Engine | Tecumseh/Briggs & Stratton 5-8 HP Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 4-6 Forward/2 Reverse |
| Fuel Tank | 1.5-2 gallons |
| Weight | 180-220 lbs |
| Years Produced | Varies by Sub-Model |
Maintenance Tips
- Regularly inspect the auger and impeller for damage: Look for bent or broken paddles/blades, and replace any worn parts to maintain optimal performance.
- Check and replace shear pins as needed: Shear pins protect the auger gearbox from damage if a hard object is ingested. Keep spare shear pins on hand.
- Change the engine oil annually: Regular oil changes keep the engine running smoothly and extend its lifespan. Use the correct type of oil as specified in the owner's manual.
- Use fuel stabilizer in the off-season: Stabilize the fuel before storing the snow blower to prevent fuel degradation and carburetor problems.
History & Background
The MTD Cub Cadet White 310-800A snow blower series was introduced as a reliable and affordable option for homeowners and small businesses. These models were designed to provide effective snow removal with a user-friendly design. While there weren't major redesigns, minor updates and variations occurred throughout its production run, mainly involving engine options and slight improvements to the chute control mechanism.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 310-800a?
The Mtd Cub Cadet White 310-800a snow blowers typically used a Tecumseh or Briggs & Stratton gas engine, ranging from 5 to 8 horsepower. Some models offered an optional electric start.
What is the clearing width of the 310-800a?
The clearing width of the Mtd Cub Cadet White 310-800a snow blower is typically between 24 and 26 inches, with an intake height of around 20-21 inches.
Is the 310-800a a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 310-800a is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw the snow out of the chute.
What are common parts needed for the 310-800a?
Common parts needed for the 310-800a include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, fuel filters, and replacement auger paddles.
