Mtd Cub Cadet White 310-800 Snow Blower Thrower Parts
The Mtd Cub Cadet White 310-800 series snow blowers were a popular choice for homeowners during their production run. These gas-powered machines typically featured a two-stage design, offering a good balance of power and maneuverability for clearing driveways and sidewalks. With various clearing widths available across the 310-800 range, these snow blowers provided a reliable solution for moderate to heavy snowfall.
The Mtd Cub Cadet White 310-800 snow blowers represent a range of models produced under the Mtd, Cub Cadet, and White Outdoor brands, primarily aimed at residential snow removal. Production years varied across the different models within this series. Engine specifications differed depending on the specific model number within the 310-800 range, but generally featured Briggs & Stratton or Tecumseh engines ranging from 5 to 10 horsepower. Many models offered an optional electric start for ease of use in cold weather. The 310-800 series primarily utilized a two-stage design. This meant an auger system broke up the snow and fed it into a high-speed impeller, which then discharged the snow through the chute. Clearing widths typically ranged from 21 to 26 inches, with intake heights suitable for handling moderate snow depths (around 12-20 inches). Throwing distances could reach up to 30-40 feet, depending on the engine size and snow conditions. The drive systems usually involved wheels with multiple forward and reverse speeds, providing good traction on various surfaces. Chute controls were generally manual, allowing the operator to adjust the direction and angle of the snow discharge. Some models included a headlight for improved visibility during early morning or evening snow removal. While heated grips were not a common feature, the reliable performance and ease of use made these models popular for homeowners dealing with moderate snowfalls on driveways and walkways.
Specifications
| Engine | Briggs & Stratton / Tecumseh 5-10 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 21-26 inches |
| Intake Height | 12-20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | 1-2 gallons (approximate, varies by model) |
| Weight | 150-200 lbs (approximate, varies by model) |
| Years Produced | Varies by specific model within the 310-800 range |
Maintenance Tips
- Inspect the auger and impeller regularly: Look for any signs of damage, wear, or bending. Replace worn or damaged parts immediately to ensure optimal performance.
- Check and replace shear pins: Shear pins protect the auger and gearbox from damage if the auger hits a hard object. Keep spare shear pins on hand and replace them as needed.
- Adjust belt tension: Loose belts can cause slippage and reduced performance. Refer to your owner's manual for instructions on how to properly adjust belt tension.
- Use fuel stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
History & Background
The Mtd Cub Cadet White 310-800 series snow blowers were introduced as a reliable and affordable option for homeowners needing to clear snow from their properties. While specific redesigns were model-dependent, the core two-stage design remained consistent throughout the series. This line contributed significantly to Mtd's presence in the residential snow blower market by offering a range of models to suit various snow removal needs.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 310-800?
The Mtd Cub Cadet White 310-800 series snow blowers typically use either a Briggs & Stratton or Tecumseh engine. The horsepower ranged from approximately 5 to 10 HP depending on the specific model. Some models also offered an electric start option for easier starting in cold weather.
What is the clearing width of the 310-800?
The clearing width of the Mtd Cub Cadet White 310-800 series snow blowers generally ranges from 21 to 26 inches. The intake height typically falls between 12 and 20 inches, allowing it to handle moderate snow depths effectively.
Is the 310-800 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 310-800 series is a two-stage snow blower. This means it uses an auger to break up and gather the snow, then an impeller to throw the snow through the discharge chute. This two-stage design makes it more powerful and efficient for clearing heavier snow than a single-stage model.
What are common parts needed for the 310-800?
Commonly needed parts for the Mtd Cub Cadet White 310-800 snow blowers include shear pins, drive belts, auger belts, auger paddles (if applicable), scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts can help maintain optimal performance and prevent costly repairs.
