Mtd Cub Cadet White 310-700 Snow Blower Thrower Parts
The Mtd Cub Cadet White 310-700 series snow blowers were popular models known for their reliability in residential snow removal. Likely manufactured from the late 1980s through the 1990s, these gas-powered machines typically featured a two-stage design offering a balance of power and maneuverability. Expect a clearing width around 20-26 inches, depending on the specific sub-model.
The Mtd Cub Cadet White 310-700 series represents a range of snow blowers designed for homeowners facing moderate to heavy snowfall. These models were primarily produced from the late 1980s into the 1990s, solidifying their place as dependable machines. Many featured Tecumseh engines, ranging from approximately 5 to 8 horsepower, with some models offering an electric start option for added convenience. The two-stage design utilizes an auger to collect snow and then feeds it to a high-speed impeller, which throws the snow away from the cleared area. Expect clearing widths between 20 and 26 inches and intake heights between 12 and 20 inches, allowing for tackling deeper drifts. Throwing distances could reach up to 30 feet or more, depending on snow conditions. Drive systems typically involved wheel drive with multiple forward and reverse speeds controlled by friction disc system. Chute controls are manual, allowing operators to adjust the direction of snow discharge. While headlights and heated grips were not standard on all models, some higher-end versions included them. These snow blowers excel in handling moderate to heavy snow accumulations on driveways and walkways.
Specifications
| Engine | Tecumseh 5-8 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 20-26 inches |
| Intake Height | 12-20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1-1.5 gallons |
| Weight | 150-200 lbs |
| Years Produced | Late 1980s - 1990s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged parts to maintain optimal performance.
- Replace Shear Pins: Always have spare shear pins on hand. Replace them immediately if they break to protect the auger and gearbox from damage caused by hard objects.
- Stabilize Fuel: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Adjust Skid Shoes: Adjust the skid shoes to the correct height for your surface to prevent damage to both the snow blower and the ground being cleared.
History & Background
The Mtd Cub Cadet White 310-700 series was introduced to provide homeowners with a durable and effective snow removal solution. These snow blowers were popular due to their reliable performance and relatively affordable price point. While there weren't major redesigns within the series, minor improvements and feature variations were introduced over the years.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 310-700?
The Mtd Cub Cadet White 310-700 snow blowers typically used Tecumseh engines, ranging from 5 to 8 horsepower. Some models offered an electric start option for added convenience.
What is the clearing width of the 310-700?
The clearing width of the Mtd Cub Cadet White 310-700 models typically ranges from 20 to 26 inches, with an intake height between 12 and 20 inches.
Is the 310-700 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 310-700 is a two-stage snow blower. It uses an auger to gather snow and then an impeller to throw the snow a greater distance.
What are common parts needed for the 310-700?
Common parts needed for the Mtd Cub Cadet White 310-700 include shear pins, belts (auger and drive), auger paddles/blades, scraper bar, skid shoes, spark plugs, and fuel filters.
