Mtd Cub Cadet White 310-552-372 Snow Blower Thrower Parts
310-552-372 parts and accessories
The MTD Cub Cadet White 310-552-372 snow blower, likely manufactured in the late 1990s and early 2000s, is a gas-powered, two-stage machine known for its reliability in tackling moderate to heavy snowfalls. Featuring a typical clearing width between 24 and 26 inches, this model was a popular choice for homeowners seeking a durable and effective snow removal solution. Its two-stage design allows it to handle deeper snow than single-stage models.
The MTD Cub Cadet White 310-552-372 snow blower was a popular model for both residential and light commercial use, manufactured primarily in the late 1990s and early 2000s. While exact engine specifications can vary depending on the specific year of manufacture, it commonly featured a Tecumseh or Briggs & Stratton engine, typically ranging from 5 to 8 HP. Some models offered an optional electric start for easier starting in cold weather. Being a two-stage snow blower, it utilizes an auger to gather snow and then an impeller to throw it a considerable distance. Expect a clearing width of 24 to 26 inches and an intake height of approximately 20 to 21 inches, allowing it to handle deeper snow drifts. Throwing distances could reach up to 30-40 feet depending on snow conditions. The drive system typically uses wheels with multiple forward and reverse speeds, providing good traction. Chute controls were generally manual, allowing the operator to adjust the direction and angle of the thrown snow. Many models also included a headlight for improved visibility during early morning or evening snow removal. This model excels in handling moderate to heavy snowfalls on driveways, sidewalks, and other residential or small commercial properties. It is best suited for paved surfaces due to its wheel-based drive system.
Specifications
| Engine | Tecumseh or Briggs & Stratton 5-8 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 5-6 Forward / 2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 180-200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace any damaged parts promptly.
- Check and Replace Shear Pins: Shear pins protect the auger gearbox from damage. Replace them immediately if they break after hitting an obstruction.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel breakdown and carburetor issues.
- Adjust Skid Shoes: Adjust the skid shoes to prevent the scraper bar from scraping the ground, especially on uneven surfaces. Proper adjustment extends the life of the scraper bar and prevents damage to your driveway.
History & Background
The MTD Cub Cadet White 310-552-372 snow blower was introduced as a mid-range model offering a balance of power and maneuverability. It represented a solid choice for homeowners needing a reliable two-stage snow blower without the cost of higher-end commercial models. While there weren't any major redesigns during its production run, minor component upgrades may have occurred year to year.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 310-552-372?
The Mtd Cub Cadet White 310-552-372 typically uses a Tecumseh or Briggs & Stratton engine, ranging from 5 to 8 HP. Some models were equipped with an optional electric start.
What is the clearing width of the 310-552-372?
The clearing width of the Mtd Cub Cadet White 310-552-372 is typically between 24 and 26 inches. The intake height is approximately 20-21 inches.
Is the 310-552-372 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 310-552-372 is a two-stage snow blower. It uses an auger to collect the snow and then an impeller to throw it away from the machine.
What are common parts needed for the 310-552-372?
Common parts needed for the 310-552-372 include shear pins (auger and impeller), drive belts, auger paddles (if applicable), scraper bar, skid shoes, spark plugs, and fuel filters.
