Mtd Cub Cadet White 310-386-352 Snow Blower Thrower Parts
The MTD Cub Cadet White 310-386-352 series snow blowers were popular gas-powered machines manufactured for residential and light commercial use. Typically featuring a two-stage design, they offered clearing widths ranging from 21-26 inches, making them suitable for driveways and walkways. Known for their reliability and ease of use, these snow throwers helped homeowners tackle moderate to heavy snowfall.
The MTD Cub Cadet White 310-386-352 series represents a range of snow blowers produced by MTD under various brand names, including Cub Cadet and White. These models were commonly available from the late 1990s through the early 2000s. Engine specifications varied within the series, but most models were equipped with Briggs & Stratton or Tecumseh engines, ranging from 5 HP to 8 HP. Some offered an optional electric start for added convenience. These are typically two-stage snow blowers, employing an auger system to break up the snow and an impeller to throw it through the discharge chute. Clearing widths generally ranged from 21 to 26 inches, with intake heights around 16-20 inches. Throwing distances could reach up to 30-40 feet depending on the model and snow conditions. The drive systems were primarily wheel-driven, often with multiple forward and reverse speeds. Chute controls were usually manual, allowing the operator to adjust the direction and angle of the snow discharge. Some models included a headlight for enhanced visibility during nighttime operation. These snow blowers are ideal for handling moderate to heavy snowfall on paved surfaces like driveways and sidewalks.
Specifications
| Engine | Briggs & Stratton or Tecumseh 5-8 HP Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 21-26 inches |
| Intake Height | 16-20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace worn or damaged parts promptly to maintain optimal performance.
- Check the shear pins before each use and replace any broken ones. Use only the correct shear pins specified for your model.
- Inspect belt tension and condition. Replace worn or cracked belts to prevent slippage and ensure proper operation of the auger and impeller.
- Before storing your snow blower for the off-season, drain the fuel or add a fuel stabilizer to prevent fuel degradation and carburetor issues.
History & Background
The MTD Cub Cadet White 310-386-352 series was a line of snow blowers aimed at the residential market, offering a balance of power and maneuverability. These models were part of MTD's broader strategy to provide affordable and reliable snow removal solutions. While not groundbreaking in design, they were valued for their consistent performance and ease of maintenance.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 310-386-352?
The Mtd Cub Cadet White 310-386-352 series typically uses a Briggs & Stratton or Tecumseh engine, ranging from 5 to 8 HP. Some models offer an electric start option.
What is the clearing width of the 310-386-352?
The clearing width of the Mtd Cub Cadet White 310-386-352 ranges from 21 to 26 inches, with an intake height of approximately 16 to 20 inches.
Is the 310-386-352 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 310-386-352 is a two-stage snow blower. It uses an auger to break up the snow and an impeller to throw it through the discharge chute.
What are common parts needed for the 310-386-352?
Common parts needed for the Mtd Cub Cadet White 310-386-352 include shear pins, belts (auger and drive), auger paddles (on some models), scraper bar, skid shoes, spark plugs, and fuel filters.
