Mtd Cub Cadet White 310-386-098 Snow Blower Thrower Parts
The Mtd Cub Cadet White 310-386-098 series snow blowers, likely manufactured in the late 1990s and early 2000s, were popular gas-powered models known for their reliability. Typically a two-stage design, these machines offered a decent clearing width for residential snow removal. Their ease of use and readily available parts made them a favorite among homeowners.
The Mtd Cub Cadet White 310-386-098 series represents a range of snow blowers built for dependable winter performance, with production likely spanning the late 1990s and early 2000s. These models commonly featured Briggs & Stratton engines, ranging from 5 HP to 8 HP, with optional electric start for easier cold-weather starts. The 310-386-098 is generally a two-stage snow blower, utilizing an auger to break up snow and an impeller to throw it. Clearing widths varied based on the specific model within the series, often ranging from 24 inches to 26 inches, with an intake height of around 20-21 inches. Throwing distance could reach up to 30-40 feet depending on snow conditions. The drive system was typically wheel-driven, offering multiple forward and reverse speeds for maneuverability. Chute controls were usually manual, allowing users to adjust the direction and angle of the snow discharge. While features like headlights and heated grips were not standard on all models, some offered them as optional upgrades. The 310-386-098 series was well-suited for clearing driveways, sidewalks, and smaller properties with moderate to heavy snowfall.
Specifications
| Engine | Briggs & Stratton 5-8 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 4-6 Forward / 2 Reverse |
| Fuel Tank | 1-2 gallons |
| Weight | Approximately 180-220 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn or damaged parts promptly to maintain optimal performance.
- Check and Replace Shear Pins: Regularly inspect shear pins that protect the auger from damage if it encounters a hard object. Replace broken shear pins immediately. Keep spares on hand.
- Fuel Stabilizer for Storage: Before storing the snow blower for the off-season, add fuel stabilizer to the gas tank to prevent fuel degradation and carburetor issues.
- Adjust Skid Shoes: Adjust the skid shoes to accommodate different surface types. Raise them for gravel or uneven surfaces and lower them for paved surfaces to prevent damage to the scraper bar.
History & Background
The Mtd Cub Cadet White 310-386-098 series was a popular line of snow blowers offered during the late 1990s and early 2000s, built by MTD. These models offered a blend of affordability and performance, making them a common sight in residential areas facing moderate snowfall. While there weren't any dramatic redesigns during its production run, minor improvements were made to components over the years.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 310-386-098?
The Mtd Cub Cadet White 310-386-098 typically features a Briggs & Stratton engine. Horsepower ranges from 5 to 8 HP, and some models have an optional electric start feature for easy starting in cold weather.
What is the clearing width of the 310-386-098?
The clearing width for the Mtd Cub Cadet White 310-386-098 snow blowers ranges from 24 to 26 inches, depending on the specific model within the series. The intake height is typically around 20-21 inches.
Is the 310-386-098 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 310-386-098 is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw the snow away from the cleared area.
What are common parts needed for the 310-386-098?
Common wear parts for the 310-386-098 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. These parts are essential for maintaining the snow blower's performance and longevity.
