Mtd Cub Cadet White 310-181-169 Snow Blower Thrower Parts
310-181-169 parts and accessories
The MTD Cub Cadet White 310-181-169 series snow blowers were popular for their reliability and ability to handle moderate snowfall. Typically manufactured in the late 1990s and early 2000s, these gas-powered snow throwers offered a balance of performance and affordability. With a clearing width around 21-24 inches and a two-stage design, they were well-suited for residential use.
The MTD Cub Cadet White 310-181-169 series represents a range of two-stage snow blowers designed for homeowners facing typical winter conditions. Production years centered around the late 1990s and early 2000s. These models were equipped with a Briggs & Stratton or Tecumseh gasoline engine, typically ranging from 5 to 8 horsepower. Many included an electric start option for easier starting in cold weather. As a two-stage snow blower, it employed an auger to collect and break up the snow, then an impeller to throw it through the chute. The clearing width generally ranged from 21 to 24 inches, with an intake height around 12-16 inches, enabling it to handle moderate snow depths. Throwing distance could reach up to 30 feet, depending on snow conditions. The drive system was wheel-driven, offering multiple forward and reverse speeds. Chute rotation was typically manual, while features like headlights and heated grips were not standard. These models were ideal for homeowners with medium-sized driveways and sidewalks, capable of handling moderate snowfall. While precise specifications may vary slightly across the 310-181-169 series, they offered a solid blend of performance and value.
Specifications
| Engine | Tecumseh 5 HP Electric Start |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 21 inches |
| Intake Height | 16 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - 5 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | 180 lbs |
| Years Produced | 1998-2005 |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace any worn or broken parts promptly.
- Always use the correct shear pins and replace them immediately if broken to prevent serious damage to the auger and gearbox.
- Check the belt tension regularly and adjust as needed to ensure proper power transmission.
- Before storing the snow blower for the off-season, drain the fuel or add fuel stabilizer to prevent fuel degradation and carburetor issues. Also, perform an oil change and lubricate all moving parts.
History & Background
The MTD Cub Cadet White 310-181-169 series filled a crucial niche in the snow blower market by offering reliable two-stage performance at a competitive price point. These models were popular during their production run, establishing MTD, Cub Cadet, and White as trusted brands for snow removal equipment. While not revolutionary, their dependability contributed to their lasting appeal.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 310-181-169?
The 310-181-169 typically used a Tecumseh 5 HP engine. Electric start was an available option on some models.
What is the clearing width of the 310-181-169?
The clearing width of the 310-181-169 snow blowers is typically 21 inches, with an intake height of approximately 16 inches.
Is the 310-181-169 a single-stage or two-stage snow blower?
The 310-181-169 is a two-stage snow blower. It uses an auger to collect snow and then an impeller to throw the snow through the discharge chute.
What are common parts needed for the 310-181-169?
Common parts needed for the 310-181-169 include shear pins, belts (auger belt and drive belt), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
