Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

John Deere CTS-II Combine Parts

Browse John Deere Cts Ii Combine replacement parts. Everything from routine maintenance items to hard-to-find components.

The John Deere CTS II combine harvester, manufactured from 1994 to 1997, offered farmers a blend of performance and reliability. Powered by a robust engine delivering significant horsepower, it handled a wide range of header widths. Its unique combine threshing system combines conventional and rotary technologies. This model gained popularity for its efficient grain separation and reduced grain loss compared to older conventional models.

About the CTS II

The John Deere CTS II was produced from 1994 to 1997, filling a niche between traditional combines and the newer rotary models. It featured a Cummins 8.3L engine producing approximately 275 horsepower, providing ample power for demanding harvesting conditions. The CTS II utilized a unique hybrid separator system - an enhanced conventional cylinder for initial threshing followed by a pair of independent rotary separators for improved grain separation. Grain tank capacity was around 220 bushels, and it could unload at a rate of approximately 2.1 bushels per second or 126 bushels per minute. Available header widths ranged from 20 to 30 feet, accommodating various field sizes and crop types. It offered optional chopper and spreader attachments for residue management. The cab provided a comfortable operator environment, equipped with air conditioning and intuitive controls. The CTS II excelled in harvesting wheat, soybeans, and corn, due to its efficient threshing and separation system.

CTS II Specifications

EngineCummins 8.3L 275 HP Diesel
Separator TypeHybrid: Conventional Cylinder w/Twin Rotary Separators
Grain Tank220 bushels
Unloading Rate126 bu/min
Header Widths20-30 ft
Fuel Capacity150 gallons
WeightApproximately 25,000 lbs
Years Produced1994-1997

CTS II Maintenance Tips

  • Concave Adjustment: Regularly inspect and adjust concave clearance based on crop type and moisture content to optimize threshing performance and minimize grain damage.
  • Belt and Chain Tension: Check and maintain proper tension on all belts and chains, ensuring smooth operation and preventing premature wear. Replace worn belts and chains promptly.
  • Sieve and Chaffer Cleaning: Thoroughly clean sieves and chaffers to remove debris and ensure proper airflow for effective grain cleaning and separation.
  • Bearing Greasing: Regularly grease all bearings according to the manufacturer's recommendations to prevent friction and extend bearing life.

CTS II History & Background

The John Deere CTS II was introduced in 1994 as a transitional model between conventional combines and the increasingly popular rotary designs. It represented a step towards improved grain separation efficiency. The CTS II combined a conventional cylinder for initial threshing with twin rotary separators to reduce grain loss and improve overall harvesting performance.

Frequently Asked Questions

What main bearing is used in the John Deere CTS II engine?

A standard main bearing for the John Deere CTS II engine is RE529319 - Main Bearing, Std..

Which concave insert is recommended for the John Deere CTS II?

For the John Deere CTS II, we recommend the AH206756 - Concave Insert - C/W Spring, Pin, Roll Pin & Washer.

Which cylinder spike tooth fits the John Deere CTS II?

The H132057 - Tooth, Cylinder Spike; w/ Hardware is a suitable replacement for the John Deere CTS II cylinder.

Showing 1-24 of 494 products
RE520036 - Rear Crankshaft Seal

RE520036 - Rear Crankshaft Seal

SKU: RE520036

$39.33

236 in stock

RE65265 - Hand Primer

RE65265 - Hand Primer

SKU: RE65265

$28.13

176 in stock

RE62777 - Exhaust Manifold; Outer (2/Pack) Gasket

RE62777 - Exhaust Manifold; Outer (2/Pack) Gasket

SKU: RE62777

$4.56

896 in stock

RE62776 - Exhaust Manifold; Inner Gasket

RE62776 - Exhaust Manifold; Inner Gasket

SKU: RE62776

$3.43

1106 in stock

RE61253 - Std. Thrust Washer Set

RE61253 - Std. Thrust Washer Set

SKU: RE61253

$69.76

10 in stock

RE57604 - Dual; Heavy Duty Torsional Damper
Out of Stock

RE57604 - Dual; Heavy Duty Torsional Damper

SKU: RE57604

$339.69

Out of stock

RE57603 - Torsional Damper
Out of Stock

RE57603 - Torsional Damper

SKU: RE57603

$256.57

Out of stock

RE57054 - Camshaft W/ Tappets

RE57054 - Camshaft W/ Tappets

SKU: RE57054

$693.28

30 in stock

RE55475 - Head Gasket

RE55475 - Head Gasket

SKU: RE55475

$86.33

43 in stock

RE534314 - Crankshaft

RE534314 - Crankshaft

SKU: RE534314

$4249.97

10 in stock

RE534183 - .011 Undersize Thrust Bearing
Out of Stock

RE534183 - .011 Undersize Thrust Bearing

SKU: RE534183

$96.56

Out of stock

RE534181 - .011 Undersize Main Bearing

RE534181 - .011 Undersize Main Bearing

SKU: RE534181

$38.15

16 in stock

RE529320 - Std. Thrust Bearing

RE529320 - Std. Thrust Bearing

SKU: RE529320

$70.15

440 in stock

RE529319 - Std. Main Bearing

RE529319 - Std. Main Bearing

SKU: RE529319

$29.18

4392 in stock

RE527550 - Head Gasket Set

RE527550 - Head Gasket Set

SKU: RE527550

$321.82

7 in stock

RE527549 - Overhaul Gasket Set
Out of Stock

RE527549 - Overhaul Gasket Set

SKU: RE527549

$517.92

Out of stock

RE524105 - Oil Cooler To Block Gasket

RE524105 - Oil Cooler To Block Gasket

SKU: RE524105

$6.71

205 in stock

RE508156 - Low Compression Piston Piston Liner Kit

RE508156 - Low Compression Piston Piston Liner Kit

SKU: RE508156

$568.35

69 in stock

RE507076 - Engine Oil Pump

RE507076 - Engine Oil Pump

SKU: RE507076

$324.35

43 in stock

RE505265 - Roller Idler

RE505265 - Roller Idler

SKU: RE505265

$99.38

78 in stock

RE503528 - Piston Rings

RE503528 - Piston Rings

SKU: RE503528

$66.64

21 in stock

RE500934 - Torsional Damper

RE500934 - Torsional Damper

SKU: RE500934

$531.53

20 in stock

RE40048 - Exhaust Clamp

RE40048 - Exhaust Clamp

SKU: RE40048

$34.43

80 in stock

RE22764 - Rear Crankshaft Seal

RE22764 - Rear Crankshaft Seal

SKU: RE22764

$39.33

236 in stock