John Deere 9780 Combine Parts
Browse John Deere 9780 Combine replacement parts. Everything from routine maintenance items to hard-to-find components.
The John Deere 9780 combine, produced from approximately 1998 to 2003, was known for its robust performance in various crops. Powered by a John Deere engine delivering around 275 horsepower, it offered header widths up to 30 feet. Its rotary separator system made it a favorite for farmers seeking efficient grain harvesting and separation capabilities.
About the 9780
The John Deere 9780 combine harvester was a workhorse in the late 1990s and early 2000s, filling a crucial role in grain harvesting. Its heart was a John Deere 8.1L 6-cylinder diesel engine, producing approximately 275 horsepower. The 9780 utilized a rotary separator system, providing efficient threshing and separation of grain. Grain tank capacity was around 280 bushels, with an unloading auger capable of emptying the tank at a rate of about 2.5 bushels per second (150 bu/min). Available header widths ranged up to 30 feet, allowing for efficient coverage in the field. Options included a fine cut chopper and chaff spreader. The cab featured air conditioning, heating, and updated controls for operator comfort. It was commonly used for harvesting wheat, corn, soybeans, and other small grains and was known for its reliability and high capacity for its time.
9780 Specifications
| Engine | John Deere 8.1L 275 HP Diesel |
|---|---|
| Separator Type | Rotary - Single Rotor |
| Grain Tank | 280 bushels |
| Unloading Rate | 150 bu/min |
| Header Widths | Up to 30 ft |
| Fuel Capacity | 150 gallons |
| Weight | Approximately 24,000 lbs |
| Years Produced | 1998-2003 (Approximate) |
9780 Maintenance Tips
- Concave Adjustment: Regularly check and adjust the concave clearance to optimize threshing performance and minimize grain damage. Refer to the operator's manual for specific settings based on the crop being harvested.
- Belt and Chain Tension: Inspect all belts and chains for proper tension and wear. Loose or worn belts and chains can lead to reduced efficiency and potential breakdowns. Replace as needed.
- Sieve and Chaffer Cleaning: Periodically clean the sieves and chaffer to prevent clogging and ensure optimal grain separation. Remove any accumulated debris to maintain consistent airflow.
- Bearing Greasing: Grease all bearings according to the manufacturer's recommendations. Proper lubrication is crucial for preventing premature wear and extending the lifespan of bearings in critical components.
9780 History & Background
The John Deere 9780 was introduced in the late 1990s as a mid-sized rotary combine offering high capacity grain harvesting. It was a significant model in Deere's combine lineup during its production run, providing a blend of power, efficiency, and reliability for farmers.
Frequently Asked Questions
Which main bearing fits the John Deere 9780?
The RE529319 - Main Bearing, Std. is designed for the 9780 combine's engine.
What fuel/water separator filter is recommended for the 9780?
For optimal fuel system protection, use the RE500186 - Filter, Fuel/Water Separator.
What wear strip is used in the upper return system of the 9780?
The upper return system in the 9780 combine uses the H171960 - Wear Strip, Upper Return.
What are common replacement parts for the John Deere 9780 combine?
Frequently replaced items for the 9780 combine include the VPK1551 - Hydraulic Filter, R51936 - Grommet, Injector Lines, H177314 - Wear Plate, Overshoot Beater, RE62777 - Gasket, Exhaust Manifold; Outer (2/Pack), AL14674 - Eccentric Locking Collar; Cleaning Shoe Shaft, and various O-Rings like R77551 - O-Ring; .208" ID X .348" OD, .070" Thick, Durometer 75 (12/Pack).

T20328 - Oil Filler Cap Gasket
SKU: T20328
48 in stock

RE524529 - Fuel Injection Pump Pressure Relief Valve
SKU: RE524529
82 in stock

RE520036 - Rear Crankshaft Seal
SKU: RE520036
236 in stock

T20129 - Valve Stem Cap
SKU: T20129
155 in stock

T20077 - Valve Keeper
SKU: T20077
1248 in stock

RE62777 - Exhaust Manifold; Outer (2/Pack) Gasket
SKU: RE62777
896 in stock

RE62776 - Exhaust Manifold; Inner Gasket
SKU: RE62776
1106 in stock

RE61812 - Air Intake Temperature Sensor
SKU: RE61812
138 in stock

RE61253 - Std. Thrust Washer Set
SKU: RE61253
10 in stock

RE57604 - Dual; Heavy Duty Torsional Damper
SKU: RE57604
Out of stock

RE55475 - Head Gasket
SKU: RE55475
43 in stock

RE543187 - Engine Oil W/O Gear Pump
SKU: RE543187
9 in stock

RE539761 - Fuel Pump
SKU: RE539761
7 in stock

RE535300 - Crankshaft
SKU: RE535300
10 in stock

RE534314 - Crankshaft
SKU: RE534314
10 in stock

RE534183 - .011 Undersize Thrust Bearing
SKU: RE534183
Out of stock

RE534181 - .011 Undersize Main Bearing
SKU: RE534181
16 in stock

RE529320 - Std. Thrust Bearing
SKU: RE529320
440 in stock

RE529319 - Std. Main Bearing
SKU: RE529319
4392 in stock

RE529318 - Std. Connecting Rod Bearing
SKU: RE529318
25 in stock

RE529187 - Valve Stem Seal
SKU: RE529187
50 in stock

RE528402 - Upper Gasket Set
SKU: RE528402
4 in stock

RE528400 - O/H Gasket Set
SKU: RE528400
18 in stock

RE527550 - Head Gasket Set
SKU: RE527550
7 in stock








