John Deere 975HY4 Combine Parts
Browse John Deere 975HY4 Combine replacement parts. Everything from routine maintenance items to hard-to-find components.
The John Deere 975HY4 combine harvester, primarily manufactured in the late 1980s, offered farmers a reliable and efficient solution for grain harvesting. With engine horsepower typically ranging around 200-230 HP and available header widths from 15 to 30 feet, this combine was versatile for various field sizes. Its conventional separator system and robust design made it a popular choice for harvesting wheat, corn, and soybeans.
About the 975HY4
The John Deere 975HY4 was a key model in the John Deere combine lineup during the late 1980s. Powering this combine was typically a John Deere 6-cylinder diesel engine, delivering approximately 215 horsepower with a displacement around 466 cubic inches. This engine provided ample power for the conventional threshing system, which used a 47-inch wide cylinder. The grain tank capacity was around 165 bushels, and the unloading auger could unload at a rate of approximately 40 bushels per minute. Available header widths ranged from 15 to 30 feet, allowing farmers to tailor the combine to their specific field sizes and crop types. Chopper and spreader options were available for residue management. The cab offered basic operator comfort and controls for adjusting threshing and cleaning settings. The 975HY4 was known for its effectiveness in harvesting wheat, soybeans, and corn, making it a versatile machine for many farming operations.
975HY4 Specifications
| Engine | John Deere 215 HP 466 cu in Diesel |
|---|---|
| Separator Type | Conventional - 47-inch Cylinder |
| Grain Tank | 165 bushels |
| Unloading Rate | 40 bu/min |
| Header Widths | 15-30 ft |
| Fuel Capacity | N/A gallons |
| Weight | N/A lbs |
| Years Produced | Late 1980s |
975HY4 Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust the concave clearance based on the crop being harvested to optimize threshing performance and minimize grain damage.
- Belt and Chain Tension: Check belt and chain tension frequently and adjust as needed to prevent slippage and premature wear. Proper tension ensures efficient power transfer throughout the combine.
- Sieve and Chaffer Cleaning: Clean the sieves and chaffer regularly to remove debris and ensure proper separation of grain from chaff. Clogged sieves reduce harvesting efficiency.
- Bearing Greasing: Grease all bearings according to the manufacturer's recommendations to prevent premature wear and failure. This is especially important for bearings exposed to dust and moisture.
975HY4 History & Background
The John Deere 975HY4 was introduced in the late 1980s as part of John Deere's efforts to provide reliable conventional combine harvesters. It offered a balance of power, capacity, and simplicity that appealed to many farmers. While not featuring major redesigns during its production run, it remained a significant player in the grain harvesting market during its time.
Frequently Asked Questions
Which starter motor is recommended for the John Deere 975HY4?
For the John Deere 975HY4 combine, the AL110597 - Starter; 12V, 3.1KW, 10T, CW, DD, Bosch Type - NEW is a suitable replacement, ensuring reliable engine starting.
Which cylinder end fits the hydraulic system on the John Deere 975HY4?
The AH75397 - Cylinder End is designed to fit the hydraulic cylinders on the John Deere 975HY4, contributing to the smooth operation of various combine functions.
What straw spreader gear is used on the John Deere 975HY4?
The H91796 - Gear, Straw Spreader is a key component for the straw spreading system on the John Deere 975HY4, ensuring even residue distribution across the field.
What are some essential replacement parts for the John Deere 975HY4?
Maintaining your John Deere 975HY4 often requires replacing key components such as the T19044 - Filter, Lube, Spin-on, FF203 - Filter, Fuel, Box Style, AN102383 - Chain, Coupler, JD39103 - Bearing, RH, and the AR65507 - Sealing Ring Kit, Liner. Additionally, the 804-464 - R12/ R134a Filter Drier is often needed for the A/C system.

AH75397 - Cylinder End
SKU: AH75397
29 in stock

R66307 - Clamp
SKU: R66307
25 in stock

Z38186 - Feeder House Main Drive Belt
SKU: Z38186
4 in stock

AR92109 - 10:00 coil) 12V A6 Style w/ Clutch (1 groove 5.75" pulley New Compressor
SKU: AR92109
297 in stock

804-464 - R12/ R134a Filter Drier
SKU: 804-464
1162 in stock

H91796 - Straw Spreader Gear
SKU: H91796
57 in stock

H91228 - Straw Spreader Gear
SKU: H91228
51 in stock

AN102383 - Coupler Chain
SKU: AN102383
141 in stock

Z10997 - Elevator Sprocket
SKU: Z10997
4 in stock

P44439 - Bearing; Half Flange
SKU: P44439
972 in stock

JD39103 - RH Bearing
SKU: JD39103
203 in stock

T29394 - Differential Bevel Gear
SKU: T29394
35 in stock

JD8226 - Outer Cup
SKU: JD8226
329 in stock

AL23836 - Check Valve
SKU: AL23836
107 in stock
RE13255 - GASKET SET
SKU: RE13255
15 in stock

RE11410 - Valve Rotator
SKU: RE11410
110 in stock

R97344 - Pan Gasket
SKU: R97344
54 in stock

R91880 - Head (6 Cyl.) Gasket
SKU: R91880
26 in stock

R90648 - Cylinder Block Plate Gasket
SKU: R90648
13 in stock

R89224 - Intake (.015") Valve
SKU: R89224
10 in stock

R87627 - Valve Stem O-Ring
SKU: R87627
98 in stock

R81989 - Front Crankshaft Sleeve
SKU: R81989
279 in stock

R80724 - Cylinder Liner
SKU: R80724
88 in stock

R80033 - Connecting Rod (2.750" Long) Capscrew
SKU: R80033
632 in stock








