John Deere 952 Combine Parts
John Deere 952 Combine parts in stock. Quality OEM and aftermarket replacement parts with fast shipping and competitive prices.
The John Deere 952 combine, manufactured from 1968 to 1972, provided reliable performance for grain harvesting. Equipped with a John Deere diesel engine, it offered dependable power, with header widths ranging from 13 to 20 feet depending on the crop. Its conventional separator design made it a popular choice for farmers seeking a durable and efficient machine for harvesting wheat, soybeans, and corn.
About the 952
The John Deere 952 combine was introduced in 1968 and remained in production through 1972. This model utilizes a John Deere diesel engine, generating approximately 105 horsepower with a displacement of approximately 329 cubic inches (5.4L), offering a balance of power and fuel efficiency for its era. The 952 uses a conventional threshing system, featuring a 40-inch wide cylinder, providing effective grain separation. Its grain tank capacity holds approximately 70 bushels, and the unloading auger can discharge grain at a rate of roughly 25 bushels per minute. Available header widths ranged from 13 to 20 feet, accommodating various crop conditions and field sizes. While factory-installed chopper/spreader options were less common, aftermarket options were available. The cab was relatively simple compared to modern combines, focusing on essential controls and visibility. The John Deere 952 proved to be a versatile machine capable of efficiently harvesting various crops, including wheat, soybeans, and corn, making it a popular choice for farmers during its production years.
952 Specifications
| Engine | John Deere 105 HP 329ci Diesel |
|---|---|
| Separator Type | Conventional - 40-inch wide cylinder |
| Grain Tank | 70 bushels |
| Unloading Rate | 25 bu/min |
| Header Widths | 13-20 ft |
| Fuel Capacity | 40 gallons |
| Weight | Approx. 11,500 lbs |
| Years Produced | 1968-1972 |
952 Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust concave clearance to ensure optimal threshing and minimize grain loss. Refer to the operator's manual for recommended settings based on the crop being harvested.
- Belt and Chain Tension: Check and maintain proper tension on all belts and chains to prevent slippage, wear, and potential breakdowns. Pay close attention to the feeder house and separator drive belts.
- Sieve and Chaffer Cleaning: Regularly clean the sieves and chaffer to remove debris and ensure proper airflow for efficient grain separation. Use compressed air or a brush to remove buildup.
- Bearing Greasing: Follow the lubrication schedule in the operator's manual and grease all bearings and lubrication points to prevent premature wear and extend the lifespan of components.
952 History & Background
The John Deere 952 was introduced in 1968 as a successor to earlier models, offering improved power and capacity. It represented a key evolution in combine design, solidifying John Deere's position in the harvesting equipment market. While it didn't undergo major redesigns during its production run, its reliable performance and robust construction made it a significant machine in agricultural history.
Frequently Asked Questions
Which fuel lift pump fits the John Deere 952?
The recommended fuel lift transfer pump for the John Deere 952 combine is the RE27667 - Pump, Fuel Lift Transfer.
What replacement starter is recommended for the John Deere 952?
For reliable starting in your John Deere 952, the RE239087 - Starter, Delco is a suitable replacement.
Which water pump should I use for my John Deere 952?
The AR97708 - Pump, Water is the correct replacement water pump for the John Deere 952 combine.
What are common wear and maintenance parts for the John Deere 952 combine?
For routine maintenance and wear, consider these common parts: the T19044 - Filter, Lube, Spin-on, a RE33705 - Thermostat, 180°, RE27348 - Bearing, Connecting Rod (Std), a RE37503 - Injector, Pencil, and RE31617 - Seal, Valve.

T26321 - Lower Bushing
SKU: T26321
69 in stock

RE27667 - Fuel Lift Transfer Pump
SKU: RE27667
2834 in stock

RE27348 - Connecting Rod (Std) Bearing
SKU: RE27348
1575 in stock

T20129 - Valve Stem Cap
SKU: T20129
155 in stock

T20077 - Valve Keeper
SKU: T20077
1248 in stock

T20073 - Camshaft Follower
SKU: T20073
131 in stock

RE52020 - Oil Pump Repair Kit
SKU: RE52020
23 in stock

RE37503 - Pencil Injector
SKU: RE37503
101 in stock

RE35685 - Oil Pump
SKU: RE35685
141 in stock

RE33115 - Piston Liner Kit
SKU: RE33115
94 in stock

RE31929 - Engine Oil Cooler
SKU: RE31929
27 in stock

RE31617 - Valve Seal
SKU: RE31617
322 in stock

RE27368 - Main (.030") Bearing
SKU: RE27368
10 in stock

RE27364 - Connecting Rod (.030") Bearing Set
SKU: RE27364
24 in stock

RE27360 - Main (.020") Bearing
SKU: RE27360
55 in stock

RE27358 - Connecting Rod (.020") Bearing Set
SKU: RE27358
193 in stock

RE27353 - Main (.010") Bearing
SKU: RE27353
105 in stock

RE27352 - Main (Std) Bearing
SKU: RE27352
105 in stock

RE27349 - Connecting Rod (.010") Bearing Set
SKU: RE27349
626 in stock

RE54709 - Major Engine Overhaul Kit
SKU: RE54709
Out of stock

34M7043 - Spring Pin
SKU: 34M7043
200 in stock

P44439 - Bearing; Half Flange
SKU: P44439
972 in stock

JD8226 - Outer Cup
SKU: JD8226
329 in stock

AZ40478 - Brake Disc
SKU: AZ40478
21 in stock








