John Deere 9410 Combine Parts
Browse John Deere 9410 Combine replacement parts. Everything from routine maintenance items to hard-to-find components.
The John Deere 9410 combine, manufactured from 1996-1999, was a popular choice for farmers needing a reliable conventional combine. Powered by a John Deere engine producing around 195 HP, it offered header widths suitable for varying field sizes. Known for its simplicity and effective grain separation, the 9410 provided a dependable solution for harvesting wheat, soybeans, and corn.
About the 9410
The John Deere 9410 combine was introduced in 1996 as part of the '10 Series' combines, replacing earlier models and offering improved efficiency. It was produced until 1999. The 9410 is powered by a John Deere 6.8L 6-cylinder diesel engine, producing approximately 195 horsepower. It employs a conventional threshing system featuring a 66-inch wide cylinder and a walker-style separator. The grain tank has a capacity of around 170 bushels, and the unloading auger can empty the tank at a rate of approximately 50-60 bushels per minute. Header widths commonly ranged from 13 to 25 feet. Options included a straw chopper or spreader, and the cab featured improved operator comfort and controls. The 9410 excelled in harvesting small grains like wheat and soybeans, while also proving capable in corn harvesting with appropriate header adjustments.
9410 Specifications
| Engine | John Deere 6.8L 195 HP Diesel |
|---|---|
| Separator Type | Conventional - 66-inch Cylinder width |
| Grain Tank | 170 bushels |
| Unloading Rate | 50-60 bu/min |
| Header Widths | 13-25 ft |
| Fuel Capacity | 90 gallons |
| Weight | Approx. 18,000 lbs |
| Years Produced | 1996-1999 |
9410 Maintenance Tips
- Concave Adjustment: Regularly check and adjust the concave clearance to optimize threshing performance and minimize grain damage. Refer to the operator's manual for recommended settings based on the crop being harvested.
- Belt and Chain Tension: Inspect all belts and chains for proper tension and wear. Loose belts can slip, reducing efficiency, while worn chains can break. Adjust or replace as needed.
- Sieve and Chaffer Cleaning: Clean the sieves and chaffer regularly to prevent buildup of chaff and debris, ensuring efficient grain separation and minimizing grain loss.
- Bearing Greasing: Grease all bearings according to the manufacturer's recommendations to prevent premature wear and failure. Pay particular attention to bearings in high-stress areas like the header and threshing system.
- Pre-Season Inspection: Before each harvesting season, thoroughly inspect the entire combine, checking for any signs of damage, wear, or corrosion. Replace any worn or damaged parts to ensure optimal performance and prevent breakdowns during the critical harvest period.
9410 History & Background
The John Deere 9410 was a key model in the '10 Series' combines, introduced in 1996. Representing a refinement of previous conventional combines, it offered enhanced reliability and efficiency for farmers. While not revolutionary, the 9410 established itself as a dependable workhorse in fields across the grain belt.
Frequently Asked Questions
Which engine oil filter is recommended for the John Deere 9410?
For optimal engine performance, the recommended engine oil filter is RE59754 - Filter, Engine Oil.
What replacement sprocket fits the lower clean grain elevator on a 9410?
The appropriate replacement sprocket for the lower clean grain elevator on the 9410 is H133143 - Sprocket, Clean Grain Elevator, Lower.
Which cylinder spike tooth with hardware is recommended for the 9410's threshing system?
For maintaining efficient threshing, the recommended cylinder spike tooth with hardware is H132057 - Tooth, Cylinder Spike; w/ Hardware.
What are some essential replacement parts for routine maintenance and common wear on the 9410?
For reliable operation, essential replacement parts include the AH206756 - Concave Insert - C/W Spring, Pin, Roll Pin & Washer, H215004 - Blade, Straw Chopper, Stationary, JD9313 - BEARING, RE48786 - Injector, Pencil, and a VPK1551 - Hydraulic Filter.

VTK6059D - Valve Train Kit (Std)
SKU: VTK6059D
2 in stock

T20073 - Camshaft Follower
SKU: T20073
131 in stock

T20034 - Upper Bushing
SKU: T20034
21 in stock

T20006 - Exhaust Manifold Gasket
SKU: T20006
834 in stock

T122075 - Oil Cooler (2 PK) O-Ring
SKU: T122075
43 in stock

RE70358 - Metric Filter Head
SKU: RE70358
143 in stock

RE69243 - Engine Oil Dipstick
SKU: RE69243
217 in stock

RE66153 - Fuel Transfer Pump
SKU: RE66153
450 in stock

RE66085 - Upper Gasket Set
SKU: RE66085
8 in stock

RE65969 - Piston Liner Kit
SKU: RE65969
52 in stock

RE65912 - Thrust (.010") Bearing
SKU: RE65912
73 in stock

RE65911 - Main (.010") Bearing
SKU: RE65911
721 in stock

RE65909 - Connecting Rod (.010") Bearing
SKU: RE65909
79 in stock

RE65908 - Connecting Rod (Std) Bearing
SKU: RE65908
7182 in stock

RE65168 - Thrust (Std) Bearing
SKU: RE65168
627 in stock

RE65165 - Main (Std) Bearing
SKU: RE65165
6921 in stock

RE59810 - Front Crankshaft Seal
SKU: RE59810
61 in stock

RE59296 - 5 Plate Engine Oil Cooler
SKU: RE59296
57 in stock

RE56690 - 7 Plate Engine Oil Cooler
SKU: RE56690
Out of stock

RE55512 - Piston
SKU: RE55512
5 in stock

RE548027 - Belt Tensioner
SKU: RE548027
143 in stock

RE532841 - Upper Gasket Set
SKU: RE532841
19 in stock

RE504914 - Engine Oil Pump
SKU: RE504914
62 in stock

RE501456 - Overhaul without Seals Gasket Set
SKU: RE501456
16 in stock








