John Deere 925 Combine Parts
John Deere 925 Combine parts in stock. Quality OEM and aftermarket replacement parts with fast shipping and competitive prices.
The John Deere 925 combine, produced in the early 1980s, was a popular choice for farmers due to its reliability and efficiency in harvesting various grains. Its durable John Deere engine offered ample horsepower for its class, and it was available with header widths suitable for smaller to medium-sized farms. Featuring a conventional separator, the 925 provided a dependable harvesting solution.
About the 925
The John Deere 925 combine harvester was manufactured from approximately 1981 to 1985, filling a need for a robust and straightforward combine. It was typically powered by a John Deere 6-cylinder diesel engine, producing around 105 horsepower with a displacement of approximately 329 cubic inches (5.4L). The 925 used a conventional cylinder and concave separator system, known for its effectiveness in a wide range of crops. The grain tank capacity was around 80 bushels, and the unloading auger could empty the tank at a rate of approximately 30 bushels per minute. Available header widths ranged from 13 to 15 feet, providing flexibility for different field sizes and crop types. The 925 offered options for straw choppers and spreaders to manage crop residue. The cab was functional and provided basic operator comfort. While not as high-capacity as later models, the 925 excelled at harvesting wheat, soybeans, and corn in moderate yields.
925 Specifications
| Engine | John Deere 6-Cylinder 105 HP Diesel |
|---|---|
| Separator Type | Conventional - 30-inch Cylinder Width |
| Grain Tank | 80 bushels |
| Unloading Rate | 30 bu/min |
| Header Widths | 13-15 ft |
| Fuel Capacity | 38 gallons |
| Weight | Approx. 11,000 lbs |
| Years Produced | 1981-1985 |
925 Maintenance Tips
- Concave Adjustment: Regularly check and adjust the concave clearance to optimize threshing performance and minimize grain loss. Refer to the operator's manual for recommended settings based on the crop being harvested.
- Belt and Chain Tension: Inspect all belts and chains for proper tension and wear. Loose belts and chains can lead to slippage, reduced performance, and premature failure. Tighten or replace as needed.
- Sieve and Chaffer Cleaning: Keep the sieves and chaffer clean and free of debris to ensure proper grain cleaning and minimize losses. Regularly clean them with compressed air or a brush.
- Bearing Greasing: Grease all bearings according to the manufacturer's recommendations to prevent premature wear and failure. Use high-quality grease specifically designed for agricultural equipment.
925 History & Background
The John Deere 925 was introduced in the early 1980s as a part of John Deere's line of conventional combines. It filled a specific need for smaller farms seeking a dependable and affordable harvesting solution. While it didn't feature major technological advancements, the 925 served as a reliable workhorse for many years.
Frequently Asked Questions
Which fuel lift pump fits the John Deere 925 combine?
The recommended fuel lift pump for this model is RE27667 - Pump, Fuel Lift Transfer. This component ensures proper fuel delivery to the engine.
What oil filter is recommended for the John Deere 925 combine?
For routine maintenance, the T19044 - Filter, Lube, Spin-on is the appropriate replacement oil filter for the 925 combine.
Which starter motor is compatible with the John Deere 925 combine?
A reliable replacement starter for your 925 combine is the RE41749 - Starter, Bosch Style.
What are some commonly replaced parts for the John Deere 925 combine?
Regularly needed replacement parts for the John Deere 925 combine include 411-042 - Black 12ga Top Serrated (sickle sections), a Z699H - Tooth Ring; Slip Clutch, JD39103 - Bearing, RH, a RE33705 - Thermostat, 180°, and R48000 - Seal, Pencil Injector.

T26321 - Lower Bushing
SKU: T26321
69 in stock

T24534 - Pan Gasket
SKU: T24534
36 in stock

T20215 - Thermostat Housing (5 pack) Gasket
SKU: T20215
86 in stock

RE27667 - Fuel Lift Transfer Pump
SKU: RE27667
2834 in stock

RE27348 - Connecting Rod (Std) Bearing
SKU: RE27348
1575 in stock

T20129 - Valve Stem Cap
SKU: T20129
155 in stock

T20094 - Crankshaft Gear
SKU: T20094
5 in stock

T20077 - Valve Keeper
SKU: T20077
1248 in stock

T20073 - Camshaft Follower
SKU: T20073
131 in stock

RE61767 - Oil w/ Gasket Cooler
SKU: RE61767
1 in stock

RE52020 - Oil Pump Repair Kit
SKU: RE52020
23 in stock

RE37492 - Overhaul without Seals Gasket Set
SKU: RE37492
61 in stock

RE35685 - Oil Pump
SKU: RE35685
141 in stock

RE27368 - Main (.030") Bearing
SKU: RE27368
10 in stock

RE27364 - Connecting Rod (.030") Bearing Set
SKU: RE27364
24 in stock

RE27360 - Main (.020") Bearing
SKU: RE27360
55 in stock

RE27358 - Connecting Rod (.020") Bearing Set
SKU: RE27358
193 in stock

RE27353 - Main (.010") Bearing
SKU: RE27353
105 in stock

RE27352 - Main (Std) Bearing
SKU: RE27352
105 in stock

RE27349 - Connecting Rod (.010") Bearing Set
SKU: RE27349
626 in stock

AH75397 - Cylinder End
SKU: AH75397
29 in stock

RE47653 - Major Engine Overhaul Kit
SKU: RE47653
Out of stock

411-042 - Black 12ga Top Serrated
SKU: 411-042
330 in stock

H91228 - Straw Spreader Gear
SKU: H91228
51 in stock








