John Deere 8820 Combine Parts
Replacement parts for the John Deere 8820 Combine. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The John Deere 8820 combine, produced from 1981 to 1989, was a popular choice among farmers due to its reliability and robust design. Powered by a John Deere diesel engine producing approximately 225 horsepower, the 8820 offered header widths up to 30 feet. This conventional separator combine provided a balance of performance and simplicity, making it well-suited for harvesting a variety of grains.
About the 8820
The John Deere 8820 combine was introduced in 1981 as part of the '20 series' combines, replacing earlier models and offering improved performance. It continued production until 1989. Powering the 8820 was a John Deere 6-cylinder diesel engine, typically producing around 225 horsepower with a displacement of approximately 466 cubic inches (7.6 liters). The 8820 utilized a conventional threshing system with a large, 66-inch wide cylinder and walkers for grain separation. The grain tank had a capacity of around 205 bushels, and the unloading auger could unload at a rate of approximately 50 bushels per minute. Available header widths ranged from 13 to 30 feet, accommodating different field sizes and crop types. Chopper and spreader options were available for residue management. The cab featured improved operator comfort and controls compared to previous models. The John Deere 8820 excelled at harvesting a wide range of crops, including wheat, corn, soybeans, and other small grains.
8820 Specifications
| Engine | John Deere 225 HP 466 cu in Diesel |
|---|---|
| Separator Type | Conventional - 66-inch wide cylinder |
| Grain Tank | 205 bushels |
| Unloading Rate | 50 bu/min |
| Header Widths | 13-30 ft |
| Fuel Capacity | 100 gallons |
| Weight | 20,000 lbs |
| Years Produced | 1981-1989 |
8820 Maintenance Tips
- Regularly inspect and adjust concave clearance to ensure proper threshing and minimize grain loss.
- Check belt and chain tension frequently, adjusting as needed to prevent slippage and premature wear.
- Clean sieves and chaffers regularly to maintain proper airflow and grain separation.
- Grease all bearings and moving parts according to the manufacturer's recommendations to prevent wear and ensure smooth operation. Prior to each harvest season, thoroughly inspect the machine, replace worn parts, and perform necessary maintenance to minimize downtime.
8820 History & Background
The John Deere 8820 combine was introduced in 1981 as a significant upgrade from previous models, offering increased capacity and efficiency. While there weren't major redesigns during its production run, ongoing improvements were implemented. The 8820 is remembered as a reliable and versatile combine that served many farmers well for years.
Frequently Asked Questions
Which diesel fuel filter fits the John Deere 8820 combine?
For the John Deere 8820 combine, the AR50041 - Filter, Diesel Fuel is a suitable replacement.
What replacement cylinder spike tooth is available for the 8820 combine?
The H132057 - Tooth, Cylinder Spike; w/ Hardware is recommended for the 8820 model.
Which main bearing fits the John Deere 8820 combine?
The JD8665 - Bearing is a direct replacement for the 8820 combine.
What are common replacement wear parts for the 8820 combine?
For routine maintenance and wear, common parts for the John Deere 8820 combine include the E76372 - Section, H132057 - Tooth, Cylinder Spike; w/ Hardware, AH154697 - Bushing, Isolator (10 Per Pk), and AR50041 - Filter, Diesel Fuel. Many operators also replace R77551 - O-Ring; .208" ID X .348" OD, .070" Thick, Durometer 75 (12/Pack) and consider upgrading worklights with RE336111 - Lamp, Worklight; LED, Flood.

VTK17892-3 - Valve Train Kit (.003")
SKU: VTK17892-3
1 in stock

VTK17892 - Valve Train Kit (Std)
SKU: VTK17892
6 in stock

T20328 - Oil Filler Cap Gasket
SKU: T20328
48 in stock

RE520036 - Rear Crankshaft Seal
SKU: RE520036
236 in stock

RE19778 - Turbocharger
SKU: RE19778
133 in stock

T20129 - Valve Stem Cap
SKU: T20129
155 in stock

T20077 - Valve Keeper
SKU: T20077
1248 in stock

SE500101 - Injector
SKU: SE500101
Out of stock

RE62777 - Exhaust Manifold; Outer (2/Pack) Gasket
SKU: RE62777
896 in stock

RE53422 - Crankshaft w/ A-R26049 Gear
SKU: RE53422
42 in stock

RE524105 - Oil Cooler To Block Gasket
SKU: RE524105
205 in stock

RE507076 - Engine Oil Pump
SKU: RE507076
43 in stock

RE48380 - Piston Rings
SKU: RE48380
37 in stock

RE47336G - Head Gasket
SKU: RE47336G
15 in stock

RE47336 - Head Gasket
SKU: RE47336
15 in stock

RE27786 - Leak-Off Fuel Line
SKU: RE27786
488 in stock

RE22764 - Rear Crankshaft Seal
SKU: RE22764
236 in stock

RE20042 - Fuel Pump
SKU: RE20042
39 in stock

R60239 - Rear Spindle Thrust Washer
SKU: R60239
133 in stock

H158884 - Spindle Bushing
SKU: H158884
271 in stock

AH94057 - Cylinder End
SKU: AH94057
41 in stock

AH156821 - Rear Axle Spindle Housing
SKU: AH156821
9 in stock

AH101187 - Tie Rod
SKU: AH101187
8 in stock

AH101186 - Tie Rod End
SKU: AH101186
9 in stock








