John Deere 7722-HILLSIDE Combine Parts
Find parts for your John Deere 7722-HILLSIDE Combine. We stock OEM and quality aftermarket replacements ready to ship.
The John Deere 7722 HILLSIDE combine, produced in the late 1970s and early 1980s, was a popular choice for farmers working on sloped terrain. This combine was powered by a John Deere diesel engine producing around 155 horsepower and offered header widths up to 20 feet. Its conventional threshing system made it a reliable machine for harvesting wheat, soybeans, and other grains on uneven fields.
About the 7722 HILLSIDE
The John Deere 7722 HILLSIDE combine was manufactured from 1978 to 1982 and designed specifically for harvesting on sloping ground, offering superior performance compared to standard combines on hillsides. Powering the 7722 was a John Deere 466 cu in (7.6 L) 6-cylinder diesel engine rated at approximately 155 horsepower. The combine utilized a conventional threshing system featuring a 41-inch wide cylinder. The grain tank capacity was approximately 105 bushels, and the unloading auger could empty the tank at a rate of around 35 bushels per minute. Available header widths ranged from 13 to 20 feet, accommodating various crop and field sizes. The 7722 typically offered a straw chopper for residue management. The cab provided basic operator comfort and controls. It was particularly well-suited for harvesting wheat, soybeans, and other small grains on hillside farms where maintaining a level threshing table was crucial for minimizing grain loss.
7722 HILLSIDE Specifications
| Engine | John Deere 466 cu in (7.6 L) 155 HP Diesel |
|---|---|
| Separator Type | Conventional - 41-inch Cylinder Width |
| Grain Tank | 105 bushels |
| Unloading Rate | 35 bu/min |
| Header Widths | 13-20 ft |
| Fuel Capacity | 57 gallons |
| Weight | Approx. 13,500 lbs |
| Years Produced | 1978-1982 |
7722 HILLSIDE Maintenance Tips
- Concave Adjustment: Regularly check and adjust concave clearance based on crop type and condition to optimize threshing performance and minimize grain damage.
- Belt and Chain Tension: Inspect and maintain proper tension on all belts and chains to prevent slippage, wear, and potential breakdowns, especially on the drive systems.
- Sieve and Chaffer Cleaning: Clean sieves and chaffers frequently to ensure proper airflow and prevent grain loss over the back. Pay close attention when harvesting different crop types.
- Bearing Greasing: Regularly grease all bearings to prevent premature wear and failure, which can lead to costly downtime during harvest season.
7722 HILLSIDE History & Background
The John Deere 7722 HILLSIDE was introduced in 1978 as an upgrade to previous hillside combine models. It represented John Deere's commitment to providing specialized equipment for farmers working in challenging terrain. The 7722 became a popular and reliable combine for hillside harvesting during its production run.
Frequently Asked Questions
Which thermostat is compatible with the John Deere 7722 HILLSIDE?
The recommended thermostat for the John Deere 7722 HILLSIDE is the AR48675 - Thermostat, 180°.
Which upper feeder house sprocket is recommended for the John Deere 7722 HILLSIDE?
For the upper feeder house, we recommend the H118583 - Sprocket, Feeder House, Upper.
What AC compressor is suitable for the John Deere 7722 HILLSIDE?
A suitable AC compressor for this model is the AR92109 - Compressor, New, A6 Style w/ Clutch (1 groove 5.75" pulley, 12V, 10:00 coil).
What are common wear parts for the John Deere 7722 HILLSIDE?
For routine maintenance and common replacements, consider the H108175 - Belt, Multi-Groove Separator / Primary Countershaft, a JD8665 - Bearing, the H85241 - Guide, Finger, a Z699H - Tooth Ring; Slip Clutch, and a DZ101880 - Filter, Lube, Spin-on. An AR98850 - O-Ring Kit is also frequently needed for various seals.

RE520036 - Rear Crankshaft Seal
SKU: RE520036
236 in stock

T20129 - Valve Stem Cap
SKU: T20129
155 in stock

T20077 - Valve Keeper
SKU: T20077
1248 in stock

RE53422 - Crankshaft w/ A-R26049 Gear
SKU: RE53422
42 in stock

RE48380 - Piston Rings
SKU: RE48380
37 in stock

RE47336 - Head Gasket
SKU: RE47336
15 in stock

RE22764 - Rear Crankshaft Seal
SKU: RE22764
236 in stock

AH94057 - Cylinder End
SKU: AH94057
41 in stock

JD9127 - Bearing Cup
SKU: JD9127
21 in stock

JD9069 - Bearing Cone
SKU: JD9069
9 in stock

JD7294 - Bearing Cup
SKU: JD7294
90 in stock

H106283 - Drive Coupler
SKU: H106283
11 in stock

AH109692 - Input (Hydro Trans) Shaft
SKU: AH109692
16 in stock

R66307 - Clamp
SKU: R66307
25 in stock

U12331 - Durometer 75 (4/Pack) .139" Thickness O-Ring; 2.734" ID X 3.012" OD
SKU: U12331
356 in stock

E79725 - BEARING FLANGE
SKU: E79725
65 in stock

C3994E - BEARING FLANGE
SKU: C3994E
65 in stock

R27796 - Durometer 70 O-ring; 6.234" ID X .139" Thick
SKU: R27796
75 in stock

TY6766 - 6E171) 5.75" pulley Denso w/ Clutch (Ear mtd. Re-Mfg Compressor
SKU: TY6766
226 in stock

TY6626 - 6E171) 5.75" pulley Denso w/ Clutch (Ear mtd. Re-Mfg Compressor
SKU: TY6626
226 in stock

RE60697 - 12V) A6 Style w/ Clutch (1 groove 5.75" pulley New Compressor
SKU: RE60697
297 in stock

RE57936 - Compressor
SKU: RE57936
226 in stock

RE49169 - Receiver Drier
SKU: RE49169
1162 in stock

RE46657 - Denso Style w/ Clutch New Compressor
SKU: RE46657
29 in stock








