John Deere 1042 Combine Parts
Find parts for your John Deere 1042 Combine. We stock OEM and quality aftermarket replacements ready to ship.
The John Deere 1042 combine, manufactured in the early-to-mid 1980s, was a popular choice for farmers looking for a reliable and efficient harvesting solution. These machines typically featured a diesel engine around 105 HP and were compatible with header widths ranging from 13 to 20 feet. Known for its conventional cylinder separator, the 1042 provided a balance of performance and simplicity in grain harvesting.
About the 1042
The John Deere 1042 combine was introduced in the early 1980s, serving as a workhorse for many grain farmers. It was built to handle a variety of crops including wheat, corn, and soybeans. Powering the 1042 was typically a John Deere 4276D 4.5L four-cylinder diesel engine, producing around 105 horsepower. This engine provided ample power for threshing and propelling the combine through the field. The separator system featured a conventional cylinder with a width that contributed to its effective threshing action. The grain tank could hold approximately 125 bushels, while the unloading auger achieved a discharge rate of around 35 bushels per minute. Farmers could equip the 1042 with header widths ranging from 13 to 20 feet, allowing it to adapt to different field conditions. While advanced chopper/spreader options weren't common on this model, it still effectively managed crop residue. Cab features were relatively basic for operator comfort, providing controls for harvesting. The John Deere 1042 was known for its reliability and effectiveness in harvesting various grains and oilseeds, making it a trusted machine on farms across the country.
1042 Specifications
| Engine | John Deere 4276D 105 HP 4.5L Diesel |
|---|---|
| Separator Type | Conventional - Cylinder with approximately 30" width |
| Grain Tank | 125 bushels |
| Unloading Rate | 35 bu/min |
| Header Widths | 13-20 ft |
| Fuel Capacity | 45 gallons |
| Weight | Approx. 12,000 lbs |
| Years Produced | Early 1980s |
1042 Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust the concave clearance based on the crop being harvested to optimize threshing and minimize grain damage.
- Belt and Chain Tension: Maintain proper tension on all belts and chains to prevent slippage, wear, and potential breakdowns. Check for wear and replace as needed.
- Sieve and Chaffer Cleaning: Frequently clean the sieves and chaffer to ensure proper separation of grain and prevent losses. Pay attention to buildup of chaff and debris.
- Bearing Greasing: Regularly grease all bearings to prevent friction, heat buildup, and premature wear. Follow the recommended greasing schedule in the operator's manual.
1042 History & Background
The John Deere 1042 combine emerged as a valuable addition to John Deere's lineup in the early 1980s. Representing a commitment to durability and function over advanced technology, the 1042 provided a solid and affordable harvesting option for many farmers. While the model lacked some of the advanced features of later machines, its reliability ensured that it remained a popular choice for grain harvesting.
Frequently Asked Questions
Which fuel transfer pump is compatible with the John Deere 1042?
The RE27667 - Pump, Fuel Lift Transfer is recommended for the John Deere 1042 combine.
What water pump fits the John Deere 1042 combine?
The AR97708 - Pump, Water is a suitable replacement for the John Deere 1042.
Which starter motor is recommended for the John Deere 1042?
Consider the RE239087 - Starter, Delco as a reliable replacement for the John Deere 1042.
What are common parts needed for the 1042?
For routine maintenance, consider parts such as the 411-042 - Black 12ga Top Serrated, a T19044 - Filter, Lube, Spin-on, a P42100 - Bushing, Rubber, HD12LW - Lockwasher, 1/2" (Plated), and the AT22961 - THERMOSTAT-180.

T26321 - Lower Bushing
SKU: T26321
69 in stock

T20215 - Thermostat Housing (5 pack) Gasket
SKU: T20215
86 in stock

RE27667 - Fuel Lift Transfer Pump
SKU: RE27667
2834 in stock

RE27348 - Connecting Rod (Std) Bearing
SKU: RE27348
1575 in stock

T20129 - Valve Stem Cap
SKU: T20129
155 in stock

T20077 - Valve Keeper
SKU: T20077
1248 in stock

T20073 - Camshaft Follower
SKU: T20073
131 in stock

RE52020 - Oil Pump Repair Kit
SKU: RE52020
23 in stock

RE35685 - Oil Pump
SKU: RE35685
141 in stock

RE31929 - Engine Oil Cooler
SKU: RE31929
27 in stock

RE27368 - Main (.030") Bearing
SKU: RE27368
10 in stock

RE27364 - Connecting Rod (.030") Bearing Set
SKU: RE27364
24 in stock

RE27360 - Main (.020") Bearing
SKU: RE27360
55 in stock

RE27358 - Connecting Rod (.020") Bearing Set
SKU: RE27358
193 in stock

RE27353 - Main (.010") Bearing
SKU: RE27353
105 in stock

RE27352 - Main (Std) Bearing
SKU: RE27352
105 in stock

RE27349 - Connecting Rod (.010") Bearing Set
SKU: RE27349
626 in stock

RE26283 - Balancer with Gear (LH) Shaft
SKU: RE26283
30 in stock

RE26282 - Balancer w/ Gear (RH) Shaft
SKU: RE26282
2 in stock

RE20585 - Crankshaft
SKU: RE20585
9 in stock

AT27622 - Return Fuel Tee
SKU: AT27622
168 in stock

AH75397 - Cylinder End
SKU: AH75397
29 in stock

Z38186 - Feeder House Main Drive Belt
SKU: Z38186
4 in stock

AT35123 - 37 DEG Elbow Fitting
SKU: AT35123
34 in stock








