Ford New Holland TB90 Tractor Parts
Replacement parts for the Ford New Holland TB90 Tractor. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The Ford New Holland TB90, manufactured from 1998-2003, was a versatile tractor known for its reliability in various farming operations. Powered by a robust Iveco 4.0L diesel engine producing approximately 88 horsepower, the TB90 delivered ample power to the PTO. Its ease of use and dependable performance made it a popular choice among farmers for haying, loader work, and general field tasks.
About the TB90
The Ford New Holland TB90 was introduced in 1998 as part of the TB series, filling a critical niche in the mid-size tractor market. Production continued until 2003. The TB90 featured an Iveco 8045.05 diesel engine, a four-cylinder, 4.0-liter (244 cubic inch) engine rated at approximately 88 horsepower. Its robust design allowed for reliable performance in demanding agricultural applications. It was available with a partially synchronized 12-speed forward and 12-speed reverse transmission offering a wide range of speeds for various tasks. The independent PTO delivered approximately 77 PTO horsepower with standard 540 RPM. The hydraulic system boasted a flow rate of approximately 12.7 GPM, supporting two remote valves for implements. The three-point hitch was a Category II with a lift capacity of roughly 5,900 lbs. The TB90 found common use in haying operations, livestock management (feeding and material handling with a loader), and light tillage. It distinguished itself within the Ford New Holland lineup by offering a good balance of power, size, and affordability, appealing to smaller farms and larger operations needing a versatile utility tractor.
TB90 Specifications
| Engine | Iveco 8045.05 88 HP 4.0L Diesel |
|---|---|
| PTO HP | 77 HP @ 540 RPM |
| Transmission | 12x12 Partial Synchro |
| Hydraulics | 12.7 GPM, 2 remotes |
| 3-Point Hitch | Category II, 5900 lbs lift capacity |
| Fuel Capacity | 26.4 gallons |
| Weight | 7,716 lbs |
| Years Produced | 1998-2003 |
TB90 Maintenance Tips
- Change the engine oil and filter every 250 hours of operation using the recommended oil type and filter for optimal engine performance.
- Inspect and maintain hydraulic fluid levels and filters regularly, typically every 500 hours, to ensure proper hydraulic system operation and prevent component wear.
- Use a fuel stabilizer during seasonal storage to prevent fuel degradation and protect the fuel system from corrosion and blockages.
- Regularly check and clean the air filter to maintain proper airflow to the engine, preventing power loss and excessive fuel consumption.
TB90 History & Background
The Ford New Holland TB90 was introduced in 1998, continuing the legacy of Ford and New Holland tractors in providing reliable and versatile machines for farmers. It provided a modern design and improved features over its predecessors. While not undergoing major redesigns during its production run, the TB90 cemented its place as a dependable workhorse in the agricultural landscape.
Frequently Asked Questions
Which starter is recommended for the Ford New Holland TB90?
For the Ford New Holland TB90, the 82005342 - Starter, Bosch is a reliable replacement option.
Which PTO shaft fits the Ford New Holland TB90?
The E8NN710AA - Shaft, PTO (540 RPM) is a direct fit for the 540 RPM PTO on the TB90.
What oil filter fits the TB90?
The recommended oil filter for the TB90 is the F2NN6714AB - Filter, Oil. This ensures proper filtration for your engine.
What are common parts needed for the TB90?
Regular maintenance often calls for items such as the VPD7107 - Filter, Air, E9NN8255AA - Gasket; Thermostat, and replacement clutch components like the 82983565 - Clutch Disc: 14" w/ damper. Other frequently replaced items include the 82981599 - Tie Rod End, Outer, RH, the E8NN9D278AA - Solenoid, Fuel Shutoff Assembly, and a new 87803008 - Pump, Water.

VPD8500 - Fuel Injector Seal Kit
SKU: VPD8500
272 in stock

CAR49001 - Ball Joint (RH)
SKU: CAR49001
71 in stock

9967993 - 4WD Front Axle Bushing
SKU: 9967993
43 in stock

83957758 - Ball Joint (RH)
SKU: 83957758
71 in stock

82981600 - LH Outer Tie Rod End
SKU: 82981600
90 in stock

82981599 - RH Outer Tie Rod End
SKU: 82981599
123 in stock

1966125C1 - Ball Joint (RH)
SKU: 1966125C1
71 in stock

133743613 - Ball Joint
SKU: 133743613
70 in stock

F0NN600BB - Hydraulic (Tandem Gear) Pump
SKU: F0NN600BB
31 in stock

83961380 - Hydraulic Pump Mounting (2/Pack) Gasket
SKU: 83961380
76 in stock

82851795 - Steering Motor
SKU: 82851795
2 in stock

011N - O-Ring Replacement (10 pk)
SKU: 011N
191 in stock

E8NN710AA - PTO (540 RPM) Shaft
SKU: E8NN710AA
11 in stock

E6NNB728AA - PTO (540 RPM) Shaft
SKU: E6NNB728AA
Out of stock

81871420 - PTO Clutch Assembly
SKU: 81871420
Out of stock

81865535 - PTO Clutch Hub
SKU: 81865535
17 in stock

81862903 - PTO Shaft
SKU: 81862903
40 in stock

E9NN2A097BA - Brake Disc
SKU: E9NN2A097BA
253 in stock

E8NN7231AA - 2nd & 6th Gear Fork
SKU: E8NN7231AA
19 in stock

E6NN7N072AA - Front Gear Shift Coupler
SKU: E6NN7N072AA
26 in stock

E6NN2N315AA - Brake Disc
SKU: E6NN2N315AA
56 in stock

D5NN2N141A - Actuator Ball
SKU: D5NN2N141A
266 in stock

83947188 - Dual Power Assembly Plate
SKU: 83947188
17 in stock

559627 - Clutch/Brake Pedal Spring
SKU: 559627
32 in stock








