Murray LP18978-1130SE Snow Blower Thrower Parts
Find parts for your Murray LP18978-1130SE Snow Blower Thrower. We stock OEM and quality aftermarket replacements ready to ship.
The Murray LP18978 - 1130SE is a popular two-stage snow blower designed for tackling moderate to heavy snowfall. Likely manufactured in the late 1990s and early 2000s, this gas-powered machine features a robust engine and a 30-inch clearing width. Its two-stage design made it a reliable choice for homeowners and property managers seeking efficient snow removal.
About the LP18978 - 1130SE
The Murray LP18978 - 1130SE is a two-stage snow thrower designed for residential and light commercial use. While the exact production years are difficult to pin down, it was likely a popular model throughout the late 1990s and early 2000s. The LP18978 - 1130SE is typically powered by a Briggs & Stratton or Tecumseh engine, generally in the 11-13 HP range. Many models offered an electric start option for easier cold-weather starts. As a two-stage snow blower, it utilizes an auger to break up the snow and then an impeller to throw it a considerable distance. The 30-inch clearing width and approximate 20-21 inch intake height allow it to handle substantial snowfalls. Throwing distance is typically between 30 and 40 feet depending on snow conditions. The drive system is wheel-driven, with multiple forward and reverse speeds. Chute control is generally manual, requiring the operator to adjust the direction by hand. While it likely didn't feature heated grips, a headlight was often included for improved visibility in low-light conditions. The LP18978 - 1130SE is best suited for paved driveways and walkways where snow needs to be cleared quickly and efficiently, especially in regions with heavy snowfall.
LP18978 - 1130SE Specifications
| Engine | Briggs & Stratton or Tecumseh 11-13 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 30 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Approx. 250 lbs |
| Years Produced | Late 1990s - Early 2000s |
LP18978 - 1130SE Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace any damaged parts to maintain optimal performance.
- Shear Pins are Critical: Always use the correct shear pins for your Murray LP18978 - 1130SE. Keep spare shear pins on hand and replace them immediately if broken to prevent damage to the auger gearbox.
- Fuel Stabilizer is your friend: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This will prevent fuel degradation and make starting easier next winter.
- Adjust Skid Shoes: Adjust the skid shoes according to the surface you're clearing (pavement vs. gravel) to prevent damage to the surface and the scraper bar.
LP18978 - 1130SE History & Background
The Murray LP18978 - 1130SE was a popular model during its production run, offering a balance of power and clearing width for homeowners. While specific redesign information is limited, Murray snow blowers of this era were known for their robust construction and reliable performance. It represented a common choice for those needing a dependable two-stage machine for typical residential snow removal.
Frequently Asked Questions
Which motion drive belt fits the Murray LP18978 - 1130SE?
The appropriate motion drive belt for the Murray LP18978 - 1130SE is 579932 - Belt, Motion Drive.
Which auger belt is recommended for the Murray LP18978 - 1130SE?
The recommended auger belt for the Murray LP18978 - 1130SE is 1736421 - Belt, Auger.
Is the LP18978 - 1130SE a single-stage or two-stage snow blower?
The Murray LP18978 - 1130SE is a two-stage snow blower. This means it uses an auger to collect and break up the snow, and then an impeller to throw the snow away from the machine. This design is more effective for handling larger volumes of snow and heavier, wetter snow conditions compared to single-stage models.
What are common parts needed for the LP18978 - 1130SE?
Common wear parts for the Murray LP18978 - 1130SE include shear pins (auger and impeller), drive belts, auger paddles (if equipped with rubber paddles on the auger), the scraper bar, skid shoes, spark plugs, and fuel filters. Regularly inspecting and replacing these parts will keep your snow blower running smoothly.










