Murray 1695363-6271200X54 Snow Blower Thrower Parts
The Murray 1695363, also known as 6271200X54, is a gas-powered snow blower designed for both residential and light commercial snow removal. This model, primarily manufactured in the late 1990s and early 2000s, typically features a two-stage design and a clearing width suitable for medium to large driveways. Its reliability and ease of use contributed to its popularity among homeowners looking for an efficient snow clearing solution.
The Murray 1695363 (6271200X54) snow blower was a popular model produced by Murray, primarily during the late 1990s and early 2000s. While specific engine specifications can vary depending on the exact year of manufacture, it generally featured a Briggs & Stratton or Tecumseh gas engine, ranging from 5 to 8 horsepower. Some models included an optional electric start for easier starting in cold weather. This machine is a two-stage snow blower. The robust auger system efficiently chews through snow, feeding it into a high-speed impeller. The clearing width typically ranges from 24 to 26 inches, with an intake height of around 20-21 inches, allowing it to handle moderate to deep snowfalls. Expect a throwing distance of up to 30 feet, depending on snow conditions. The drive system is typically wheel-driven, offering multiple forward and reverse speeds. The chute rotation is usually controlled manually, allowing the operator to direct the snow stream. While not always standard, some models may include a headlight for improved visibility during early morning or late evening snow removal. This snow blower is well-suited for homeowners with medium to large driveways, capable of handling moderate to heavy snowfalls.
Specifications
| Engine | Briggs & Stratton or Tecumseh 5-8 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | 1.5 gallons (estimated) |
| Weight | 200-250 lbs (estimated) |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace worn or damaged parts promptly to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins protect the auger gearbox from damage. Inspect them regularly and replace any that are broken or sheared off. Always use the correct replacement shear pins.
- Fuel Stabilizer: Add fuel stabilizer to the fuel tank before storing the snow blower for the off-season. This will prevent fuel degradation and ensure easy starting when you need it next winter.
- Oil Changes: Perform regular oil changes according to the manufacturer's recommendations (typically annually or every 25 hours of use). Using the correct oil type is crucial for engine longevity.
History & Background
The Murray 1695363 snow blower was introduced as a reliable and affordable option for homeowners needing a capable snow removal machine. While there were no major redesigns during its production run, minor updates and variations in engine specifications occurred. This model became a popular choice due to its blend of power, clearing capacity, and relatively simple operation.
Frequently Asked Questions
What engine is in the Murray 1695363 - 6271200X54?
The Murray 1695363 typically uses a Briggs & Stratton or Tecumseh engine, ranging from 5 to 8 horsepower. Some models offered an electric start option.
What is the clearing width of the 1695363 - 6271200X54?
The clearing width of the Murray 1695363 is typically between 24 and 26 inches. The intake height is approximately 20-21 inches.
Is the 1695363 - 6271200X54 a single-stage or two-stage snow blower?
The Murray 1695363 is a two-stage snow blower. It uses an auger to collect the snow and then an impeller to throw the snow through the chute.
What are common parts needed for the 1695363 - 6271200X54?
Common replacement parts for the Murray 1695363 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters.
