Murray 1695320-ST9528 Snow Blower Thrower Parts
The Murray 1695320, also known as the ST9528, is a gas-powered, two-stage snow thrower primarily manufactured for residential use. Featuring a 28-inch clearing width, this model gained popularity for its ability to handle moderate to heavy snowfall with its robust engine and efficient snow throwing capability. It's a reliable choice for homeowners looking for a dependable machine to clear driveways and walkways.
The Murray 1695320 (ST9528) was a popular two-stage snow blower designed for residential snow removal. Production years are difficult to definitively pinpoint but it was likely available in the late 1990s to early 2000s. Typically, these models were equipped with a Tecumseh engine, most likely between 9 and 10 horsepower. Electric start was often an available option. Being a two-stage snow blower, it uses an auger to gather snow and then an impeller to forcefully discharge it through the chute. The 28-inch clearing width allows for efficient snow removal across a large area. The intake height is generally around 20-21 inches, enabling it to handle deeper snowdrifts. Throwing distance could reach up to 30-40 feet, depending on snow conditions. This model usually featured a wheel-drive system with multiple forward and reverse speeds, providing good traction and maneuverability. Chute controls were typically manual, allowing the operator to adjust the direction of the snow stream. A headlight for improved visibility in low-light conditions was a common feature. The Murray ST9528 is well-suited for homeowners dealing with moderate to heavy snowfall on driveways, walkways, and patios. It is effective on paved surfaces and can handle compacted snow with ease.
Specifications
| Engine | Tecumseh 9-10 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 28 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 5 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons (approx.) |
| Weight | 200 lbs (approx.) |
| Years Produced | Late 1990s - Early 2000s (Approx.) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace any worn or broken parts to maintain optimal performance.
- Replace Shear Pins: Keep extra shear pins on hand. Replace broken shear pins immediately to prevent damage to the auger and gearbox if the auger strikes a hard object.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and ensure easy starting next winter.
History & Background
The Murray 1695320 (ST9528) snow blower was introduced as a mid-range option in Murray's snow removal lineup. While specific details about redesigns are scarce, the model represented a standard in two-stage snow removal for homeowners during its production run. Its reliability and performance made it a popular choice in its class.
Frequently Asked Questions
What engine is in the Murray 1695320 - ST9528?
The Murray 1695320 - ST9528 typically used a Tecumseh engine, ranging from 9 to 10 horsepower. Electric start was often an available option on some models.
What is the clearing width of the 1695320 - ST9528?
The Murray 1695320 - ST9528 features a clearing width of 28 inches and an intake height of approximately 21 inches.
Is the 1695320 - ST9528 a single-stage or two-stage snow blower?
The Murray 1695320 - ST9528 is a two-stage snow blower. It utilizes an auger to collect snow and then an impeller to forcefully discharge it through the chute.
What are common parts needed for the 1695320 - ST9528?
Commonly needed parts include shear pins (for the auger), belts (for the auger and impeller), the scraper bar (at the base of the unit), skid shoes (to adjust height), spark plugs, and fuel filters.
