Murray 1695386-C950-52771-0 Snow Blower Thrower Parts
Shop Murray 1695386-C950-52771-0 Snow Blower Thrower parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.
The Murray 1695386 (C950-52771-0) is a gas-powered, two-stage snow thrower designed for tackling moderate to heavy snowfall. With a clearing width of around 26 inches, this model was popular for its blend of power and maneuverability, making it suitable for homeowners and small businesses. It was manufactured during the late 1990s and early 2000s.
About the 1695386 - C950-52771-0
The Murray 1695386 (C950-52771-0), sold under various Sears Craftsman model numbers as well, was a popular two-stage snow thrower designed for residential snow removal. Production ran from approximately the late 1990s to early 2000s. It typically featured a Briggs & Stratton or Tecumseh engine, ranging from 8 to 10 HP (check your specific model). An electric start option was available on some models, providing easier starting in cold weather. As a two-stage unit, it uses an auger to break up the snow and then an impeller to throw it out of the discharge chute. The clearing width is approximately 26 inches, with an intake height of around 20-21 inches, allowing it to handle deeper snow drifts. Throwing distance could reach up to 30-35 feet, depending on snow conditions. The drive system is wheel-driven, with multiple forward and reverse speeds, often 6 forward and 2 reverse. The chute rotation is typically manual, controlled by a crank lever. While not usually equipped with headlights or heated grips, this model was favored for its robust construction and ability to handle a wide range of snow conditions, from light and fluffy to wet and heavy. It's well-suited for average-sized driveways and sidewalks.
1695386 - C950-52771-0 Specifications
| Engine | Briggs & Stratton or Tecumseh 8-10 HP Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons (approximate) |
| Weight | 200 lbs (approximate) |
| Years Produced | Late 1990s - Early 2000s |
1695386 - C950-52771-0 Maintenance Tips
- Inspect the Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn or damaged parts promptly to maintain optimal performance.
- Shear Pin Replacement: Keep extra shear pins on hand and know how to replace them. These pins protect the auger gearbox from damage if it encounters a solid object.
- Fuel Stabilization and Oil Changes: Use fuel stabilizer in the off-season to prevent fuel degradation. Change the engine oil annually, or more frequently if used extensively.
- Check and Adjust Skid Shoes: Ensure the skid shoes are properly adjusted to prevent damage to the scraper bar and protect the auger housing, especially on uneven surfaces.
1695386 - C950-52771-0 History & Background
The Murray 1695386 (C950-52771-0) was a reliable and widely distributed snow blower popular in the late 1990s and early 2000s. Sold under both the Murray brand and private-labeled for retailers like Sears Craftsman, it offered a balance of performance and affordability. There were no significant redesigns during its production run, indicating a stable and well-regarded design.
Frequently Asked Questions
Which motion drive belt fits the Murray 1695386 - C950-52771-0 snow blower?
The recommended motion drive belt for the Murray 1695386 snow blower is the 579932 - Belt, Motion Drive.
What auger drive belt is recommended for the Murray 1695386 - C950-52771-0 snow blower?
For the Murray 1695386 snow blower, the 585416 - Belt, Bracket Auger Drive is a recommended component.
What are the essential replacement belts for the Murray 1695386 - C950-52771-0 snow blower?
For optimal operation, the Murray 1695386 snow blower relies on the 579932 - Belt, Motion Drive and the 585416 - Belt, Bracket Auger Drive.
What are common parts needed for the Murray 1695386 - C950-52771-0?
Common wear parts for the Murray 1695386 snow blower include crucial belts such as the 579932 - Belt, Motion Drive and the 585416 - Belt, Bracket Auger Drive.










