Murray 1694999-ST1028S Snow Blower Thrower Parts
The Murray 1694999 (ST1028S) is a robust two-stage snow blower designed for both residential and light commercial use. Often equipped with a powerful gas engine and a 28-inch clearing width, this model was known for its reliability and ability to handle moderate to heavy snowfall. Its user-friendly controls and durable construction made it a popular choice for homeowners looking for a dependable snow removal solution.
The Murray 1694999 (ST1028S) snow blower gained prominence as a reliable solution for tackling winter's challenges in both residential and commercial settings. While exact years of production can vary, the ST1028S was typically found in the late 1990s and early 2000s. It often featured a Briggs & Stratton or Tecumseh gas engine ranging from 10-11.5 HP, frequently with an electric start option for easy ignition in cold weather. As a two-stage snow blower, it utilizes a robust auger system to break up snow and ice, followed by an impeller to forcefully discharge it. The 28-inch clearing width and an intake height of around 20-21 inches allow it to efficiently clear wide paths and handle significant snow depths. The throwing distance could reach up to 30-40 feet, depending on snow conditions. The wheel drive system typically offered multiple forward speeds and reverse, providing good traction and maneuverability. Chute control was generally manual, allowing the operator to adjust the direction and angle of the snow discharge. Many models included a headlight for improved visibility during early morning or late evening snow removal. This model excels in areas with moderate to heavy snowfall and is suitable for clearing driveways, sidewalks, and small parking lots.
Specifications
| Engine | Briggs & Stratton/Tecumseh 10-11.5 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 28 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Approx. 1.5 gallons |
| Weight | Approx. 250 lbs |
| Years Produced | Late 1990s - Early 2000s (Approx.) |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace worn or damaged parts immediately to maintain optimal performance.
- Check shear pins frequently and replace them if broken. Always use the correct replacement shear pins to prevent damage to the auger gearbox.
- Ensure proper belt tension for both the auger and drive systems. Loose belts can slip, reducing snow throwing distance and drive power.
- Change the engine oil at the recommended intervals as specified in the owner's manual. Use a fuel stabilizer in the gasoline during off-season storage to prevent fuel degradation and carburetor issues. Check and adjust the skid shoes to ensure proper ground clearance and prevent damage to the scraper bar.
History & Background
The Murray 1694999 (ST1028S) was a popular two-stage snow blower that helped solidify Murray's reputation for producing reliable and affordable snow removal equipment. While specific dates are difficult to pinpoint, this model was a staple during its production run. It represented a commitment to delivering robust performance for homeowners and light commercial users alike.
Frequently Asked Questions
What engine is in the Murray 1694999 - ST1028S?
The Murray 1694999 (ST1028S) is typically equipped with a Briggs & Stratton or Tecumseh engine, ranging from 10 to 11.5 horsepower. Electric start was often an available option.
What is the clearing width of the 1694999 - ST1028S?
The Murray 1694999 (ST1028S) has a clearing width of 28 inches and an intake height of approximately 21 inches.
Is the 1694999 - ST1028S a single-stage or two-stage snow blower?
The Murray 1694999 (ST1028S) is a two-stage snow blower. It uses an auger to gather and break up the snow, and then an impeller to discharge it through the chute.
What are common parts needed for the 1694999 - ST1028S?
Common replacement parts for the Murray 1694999 (ST1028S) include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, fuel filters, and engine oil.
