Murray 1695382-C950-52729-0 Snow Blower Thrower Parts
The Murray 1695382 - C950-52729-0 is a robust snow thrower designed for both residential and light commercial use, likely manufactured in the late 1990s and early 2000s. This gas-powered, two-stage model offered a practical clearing width and solid performance, making it a popular choice for homeowners needing reliable snow removal. It was known for its durability and ease of use.
The Murray 1695382 - C950-52729-0 snow thrower (also referred to as snow blower) was a popular model for those needing a dependable solution for snow removal. While exact production years are difficult to pin down, it was likely manufactured throughout the late 1990s and early 2000s. This model typically featured a Briggs & Stratton engine, likely in the 8-10 HP range, though some variations might have used Tecumseh engines. Electric start was a common feature on many models, offering added convenience in cold weather. As a two-stage snow thrower, the 1695382 - C950-52729-0 utilizes an auger to break up the snow and then an impeller to throw it away from the cleared area. The auger system usually consisted of a serrated steel auger designed to efficiently cut through packed snow and ice. The clearing width was typically around 26 inches, with an intake height of approximately 20 inches. Throwing distance could reach up to 30-40 feet depending on snow conditions. The drive system was wheel-driven, offering multiple forward and reverse speeds. Chute control was generally manual, requiring the operator to physically adjust the direction of the snow discharge. Some models might have included a headlight for improved visibility in low-light conditions. This snow thrower was ideally suited for homeowners and property managers dealing with moderate to heavy snowfall on driveways, sidewalks, and parking areas.
Specifications
| Engine | Briggs & Stratton 8-10 HP Electric Start (likely) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace any damaged parts immediately to maintain optimal performance.
- Replace Shear Pins: Keep extra shear pins on hand and replace them immediately if they break. Using the correct shear pins is crucial to protect the auger and transmission from damage.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Check and Adjust Skid Shoes: Inspect and adjust the skid shoes regularly to ensure proper clearance and prevent damage to the scraper bar and the surface you're clearing.
History & Background
The Murray 1695382 - C950-52729-0 was a reliable snow thrower introduced as part of Murray's broader line of outdoor power equipment. While it didn't feature major redesigns during its production run, it provided a consistent and dependable option for consumers seeking a two-stage snow removal solution. It played a significant role in Murray's presence in the residential snow blower market.
Frequently Asked Questions
What engine is in the Murray 1695382 - C950-52729-0?
The Murray 1695382 - C950-52729-0 typically features a Briggs & Stratton engine in the 8-10 HP range. Many models also included an electric start feature for easier starting in cold weather. Some models may have had a Tecumseh engine.
What is the clearing width of the 1695382 - C950-52729-0?
The Murray 1695382 - C950-52729-0 has a clearing width of approximately 26 inches and an intake height of around 20 inches, allowing it to handle moderate to heavy snowfalls effectively.
Is the 1695382 - C950-52729-0 a single-stage or two-stage snow blower?
The Murray 1695382 - C950-52729-0 is a two-stage snow blower. This means it uses an auger to gather and break up the snow, and then an impeller to forcefully throw the snow out of the chute. This design allows it to handle deeper and heavier snow compared to single-stage models.
What are common parts needed for the 1695382 - C950-52729-0?
Common parts needed for the Murray 1695382 - C950-52729-0 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. These parts are subject to wear and tear and may need periodic replacement to keep your snow blower running smoothly.
