Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Murray 1695543 Snow Blower Thrower Parts

Find parts for your Murray 1695543 Snow Blower Thrower. We stock OEM and quality aftermarket replacements ready to ship.

The Murray 1695543 is a robust gas-powered snow thrower, likely manufactured in the late 1990s and early 2000s, designed for both residential and light commercial use. Featuring a two-stage design and a substantial clearing width, the 1695543 became a popular choice for homeowners needing reliable snow removal performance. Its relatively simple design also made it easier to maintain.

About the 1695543

The Murray 1695543 snow thrower was a popular model produced by Murray, likely spanning the late 1990s into the early 2000s. While specific engine details can vary depending on the production year, it typically featured a Briggs & Stratton or Tecumseh engine, likely in the 5-8 HP range. Electric start was a common option, offering convenient starting in cold weather. As a two-stage snow blower, the 1695543 employs an auger system to break up the snow and an impeller to throw it. This model typically boasted a clearing width of around 26 inches and an intake height of approximately 20-21 inches, allowing it to handle moderate to heavy snowfall. Throwing distances could reach up to 30 feet, depending on snow conditions. The drive system is wheel-driven, often with multiple forward and reverse speeds, providing good traction and maneuverability. Chute control is typically manual, allowing the operator to direct the snow stream. A headlight might be present on some models for improved visibility in low-light conditions. The Murray 1695543 is well-suited for clearing driveways, sidewalks, and patios in areas with moderate to heavy snowfall, making it a versatile choice for homeowners and property managers.

1695543 Specifications

EngineBriggs & Stratton or Tecumseh 5-8 HP Electric Start (Optional)
Stage TypeTwo-Stage
Clearing Width26 inches
Intake Height21 inches
Throwing DistanceUp to 30 ft
Drive SystemWheel - Multiple Forward/Reverse Speeds
Fuel Tank1.5 gallons
WeightApproximately 200 lbs
Years ProducedLate 1990s - Early 2000s

1695543 Maintenance Tips

  • Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn or damaged parts to maintain optimal performance.
  • Replace Shear Pins: Keep spare shear pins on hand and replace them immediately if they break. Use only the correct shear pins specified for the Murray 1695543.
  • Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This prevents fuel degradation and ensures easy starting next season.
  • Adjust Skid Shoes: Periodically adjust the skid shoes to maintain the correct clearance between the scraper bar and the ground. This prevents damage to the scraper bar and ensures efficient snow removal.

1695543 History & Background

The Murray 1695543 was introduced as a mid-range two-stage snow thrower, offering a balance of power and affordability. While there weren't major redesigns during its production run, subtle improvements to engine components and chute controls were likely implemented over the years. This model played a significant role in providing accessible snow removal solutions for a wide range of consumers.

Frequently Asked Questions

Which motion drive belt fits the Murray 1695543 snow blower?

The recommended motion drive belt for the Murray 1695543 snow blower is 579932 - Belt, Motion Drive.

What auger drive belt is compatible with the Murray 1695543?

For the Murray 1695543, the compatible auger drive belt is 585416 - Belt, Bracket Auger Drive.

When should the motion drive belt be replaced on a Murray 1695543?

The motion drive belt, such as the 579932 - Belt, Motion Drive, should be replaced if you notice loss of drive power or if the belt shows signs of wear, cracking, or stretching.

What are common parts needed for the Murray 1695543?

For maintaining optimal performance of the Murray 1695543, common wear parts include the 579932 - Belt, Motion Drive and the 585416 - Belt, Bracket Auger Drive. Regular replacement of these parts ensures efficient operation.

Showing 1-2 of 2 products