Murray 1695459 Snow Blower Thrower Parts
The Murray 1695459 snow blower is a robust machine designed for tackling moderate to heavy snowfall. Typically manufactured in the late 1990s and early 2000s, this gas-powered, two-stage snow thrower offered a substantial clearing width, making it a popular choice for homeowners and property managers needing efficient snow removal. Its reliable engine and sturdy construction contributed to its enduring reputation.
The Murray 1695459 snow blower was a workhorse model produced by Murray, primarily during the late 1990s and early 2000s. It generally featured a Briggs & Stratton engine, typically in the 8-10 HP range, though specific horsepower varied depending on the year of manufacture. Some models offered an optional electric start for easier starting in cold weather. As a two-stage snow blower, the 1695459 utilized a robust auger system to break up snow and then an impeller to throw it a considerable distance. Its clearing width was typically around 26-28 inches, with an intake height of approximately 20-21 inches, enabling it to handle significant snow depths. Expect a throwing distance of up to 30-35 feet, depending on snow conditions. The drive system was wheel-driven, offering multiple forward and reverse speeds for enhanced maneuverability. Chute controls were generally manual, allowing users to adjust the direction and angle of the snow discharge. While a headlight was a common feature, heated grips were less common on this model. The Murray 1695459 was ideally suited for homeowners with medium to large driveways and for light commercial use in areas with moderate to heavy snowfall.
Specifications
| Engine | Briggs & Stratton 8-10 HP (Varies) Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Approx. 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged parts promptly to maintain optimal performance.
- Shear Pin Replacement: Keep a supply of shear pins on hand. Replace any broken shear pins immediately to protect the auger and gearbox from damage.
- Oil Changes and Fuel Stabilizer: Perform regular oil changes according to the manufacturer's recommendations. Add fuel stabilizer to the fuel tank before storing the snow blower for the off-season to prevent fuel degradation.
- Skid Shoe Adjustment: Adjust the skid shoes to the appropriate height based on the surface you're clearing. This prevents damage to both the snow blower and the surface.
History & Background
The Murray 1695459 was introduced as a mid-range two-stage snow blower, targeting homeowners and light commercial users. While specific redesigns were minimal during its production run, component updates and engine variations occurred. It established itself as a dependable and affordable option in the snow removal equipment market, known for its robust construction and effective snow-clearing capabilities.
Frequently Asked Questions
What engine is in the Murray 1695459?
The Murray 1695459 typically uses a Briggs & Stratton engine. Horsepower generally ranges from 8 to 10 HP, depending on the specific year and model variation. Some models were available with an optional electric start feature.
What is the clearing width of the 1695459?
The clearing width of the Murray 1695459 is typically between 26 and 28 inches. The intake height is approximately 20-21 inches, allowing it to handle a decent amount of snow in a single pass.
Is the 1695459 a single-stage or two-stage snow blower?
The Murray 1695459 is a two-stage snow blower. It uses an auger to break up and gather the snow, then an impeller to forcefully throw the snow away from the clearing area. This two-stage design makes it more effective for heavier snow and larger areas compared to single-stage models.
What are common parts needed for the 1695459?
Common parts needed for the Murray 1695459 include shear pins (to protect the auger), drive belts (for the auger and impeller), scraper bar (at the base of the housing), skid shoes (to adjust the height), spark plugs, and fuel filters. Auger paddles are less common but may need replacement over time due to wear.
