Murray 1695385-C950-52751-0 Snow Blower Thrower Parts
The Murray 1695385 - C950-52751-0 snow thrower, likely manufactured in the late 1990s to early 2000s, is a gas-powered two-stage model designed for efficient snow removal. Known for its robust build and reliable performance, this snow blower typically features a 26-inch clearing width, making it a popular choice for homeowners dealing with moderate to heavy snowfall on driveways and walkways. Its two-stage design allows it to handle deeper snow and throw it a considerable distance.
The Murray 1695385 - C950-52751-0 is a two-stage snow thrower designed for both residential and light commercial use. While the exact years of production are difficult to pinpoint without exhaustive records, it's believed to have been available from the late 1990s to the early 2000s. These models typically utilized a Briggs & Stratton or Tecumseh engine in the 8-10 HP range. Some models featured an optional electric start for easier starting in cold weather. The two-stage system employs a robust auger to break up the snow and then an impeller to forcefully discharge it through the chute. A typical clearing width for this model is 26 inches with an intake height around 20-21 inches, enabling it to handle substantial snowfalls. The throwing distance can reach up to 30-40 feet depending on snow conditions. It uses a wheel drive system with multiple forward speeds and reverse, providing good traction and maneuverability. Chute controls are generally manual, allowing the user to adjust the direction of the snow stream. Headlights may or may not have been factory installed on this model. This snow blower is ideal for homeowners and property managers dealing with moderate to heavy snowfall on medium to large driveways and walkways.
Specifications
| Engine | Briggs & Stratton or Tecumseh 8-10 HP with Optional Electric Start |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Late 1990s - Early 2000s (estimated) |
Maintenance Tips
- Inspect the Auger and Impeller: Regularly check the auger blades and impeller for damage, wear, or obstructions. Replace worn parts promptly.
- Replace Shear Pins: Always use the correct shear pins. Replace shear pins immediately after breakage to prevent damage to the auger and gearbox.
- Check Belt Tension: Inspect the belts for wear and proper tension. Loose belts can cause slippage and reduce performance.
- Use Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
History & Background
The Murray 1695385 - C950-52751-0 was introduced as a mid-range two-stage snow blower during a period of significant snow blower development. It represented a solid, dependable option for consumers seeking a balance between performance and affordability. While not revolutionary, its durable construction and ease of use contributed to its popularity in the residential snow removal market.
Frequently Asked Questions
What engine is in the Murray 1695385 - C950-52751-0?
The Murray 1695385 - C950-52751-0 typically uses a Briggs & Stratton or Tecumseh engine in the 8-10 HP range. Some models were equipped with an optional electric start for added convenience.
What is the clearing width of the 1695385 - C950-52751-0?
The clearing width of the Murray 1695385 - C950-52751-0 is typically 26 inches, with an intake height of approximately 21 inches.
Is the 1695385 - C950-52751-0 a single-stage or two-stage snow blower?
The Murray 1695385 - C950-52751-0 is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw the snow out of the discharge chute.
What are common parts needed for the 1695385 - C950-52751-0?
Common replacement parts for the Murray 1695385 - C950-52751-0 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. It is recommended to inspect these regularly for wear and tear.
