Murray 1695518-18-2811-29 Snow Blower Thrower Parts
The Murray 1695518 - 18-2811-29 snow blower, known for its reliable performance, was a popular choice for homeowners during its production run. This gas-powered snow thrower typically features a clearing width appropriate for residential driveways and walkways. Though exact specs vary, many were two-stage models offering a balance of power and maneuverability for tackling moderate snowfalls.
The Murray 1695518 - 18-2811-29 series snow thrower was designed to provide homeowners with a dependable snow removal solution. While precise years of production and engine specifications can vary, these models commonly used a Briggs & Stratton or Tecumseh gas engine. The engine horsepower generally ranged depending on the specific sub-model, with some models offering an optional electric start for easier cold-weather starts. This snow blower generally utilized a two-stage system, featuring a robust auger to break up and feed snow into a high-speed impeller. The impeller then discharges the snow through the chute, achieving a reasonable throwing distance suited for average residential properties. The clearing width usually falls within the range of 20-26 inches, and the intake height allows for handling snow depths up to around 12-20 inches, varying slightly across models. Drive systems were typically wheel-driven with multiple forward and reverse speeds, offering enhanced control. Chute rotation was generally manual, though some variations might include remote controls. While features like headlights and heated grips weren't always standard, they could be found on certain sub-models. This Murray snow thrower is well-suited for homeowners dealing with moderate to heavy snowfall on paved surfaces like driveways and walkways.
Specifications
| Engine | Likely Briggs & Stratton or Tecumseh, HP Varies, Electric Start Varies |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 20-26 inches (Typical Range) |
| Intake Height | 12-20 inches (Typical Range) |
| Throwing Distance | Up to 30 ft (Typical Range) |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Varies |
| Weight | Varies |
| Years Produced | Likely Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check for wear and damage on the auger blades and impeller. Replace worn or damaged parts to maintain optimal performance.
- Check and Replace Shear Pins: Inspect shear pins after heavy use or if the auger stops suddenly. Broken shear pins prevent damage to the drive system. Use only manufacturer-recommended shear pins.
- Use Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This prevents fuel breakdown and carburetor issues.
- Adjust Skid Shoes: Adjust the skid shoes to the appropriate height for your surface (paved, gravel, etc.). This prevents damage to the snow blower and the surface you are clearing.
History & Background
The Murray 1695518 - 18-2811-29 series was a common sight in suburban driveways. Specific production years are not universally documented, but it was likely in production from the late 1990s through the early 2000s. It provided a reliable and affordable snow removal solution for homeowners.
Frequently Asked Questions
What engine is in the Murray 1695518 - 18-2811-29?
The Murray 1695518 - 18-2811-29 snow blower typically uses a Briggs & Stratton or Tecumseh gas engine. The horsepower varies depending on the exact model and year, but electric start was sometimes an available option.
What is the clearing width of the 1695518 - 18-2811-29?
The clearing width of the Murray 1695518 - 18-2811-29 generally ranges from 20 to 26 inches, offering a good balance between maneuverability and snow removal capacity. The intake height typically allows for clearing snow depths between 12 and 20 inches.
Is the 1695518 - 18-2811-29 a single-stage or two-stage snow blower?
The Murray 1695518 - 18-2811-29 is generally a two-stage snow blower. This means it uses an auger to collect and break up the snow, and then an impeller to throw the snow out of the chute. This system is more effective at handling heavier and wetter snow compared to single-stage models.
What are common parts needed for the 1695518 - 18-2811-29?
Common wear parts for the Murray 1695518 - 18-2811-29 include shear pins, belts (auger and drive), auger paddles (if applicable), scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts helps maintain optimal performance and prevent costly repairs.
