Murray 1695488-18-2863-29 Snow Blower Thrower Parts
The Murray 1695488 - 18-2863-29 is a robust snow blower, likely manufactured in the late 1990s or early 2000s, powered by a gas engine. Known for its reliable performance and affordability, this two-stage snow thrower offers a practical clearing width, making it a popular choice for homeowners dealing with moderate snowfall. Find all the genuine Murray parts you need to keep your 1695488 - 18-2863-29 running smoothly for years to come.
The Murray 1695488 - 18-2863-29 snow blower was a popular model, designed for both residential and light-commercial snow removal. Production is estimated to have occurred in the late 1990s and early 2000s. While precise engine specifications varied, most models featured a Briggs & Stratton or Tecumseh gas engine, typically ranging from 5 to 8 horsepower. Many models included an electric start option for convenient cold-weather starts. This model is a two-stage snow blower, employing a robust auger to break up snow and an impeller to forcefully discharge it. It boasts a clearing width of around 26-28 inches and an intake height of approximately 20-21 inches. Depending on snow conditions and engine power, the throwing distance could reach up to 30-40 feet. The drive system is typically wheel-driven, with multiple forward and reverse speeds for enhanced maneuverability. The chute is manually controlled, allowing for quick adjustments to the direction of snow discharge. While not all units had a headlight, some offered this as an optional feature. Heated grips were not standard on this model. The Murray 1695488 - 18-2863-29 is best suited for handling moderate to heavy snowfall on driveways, sidewalks, and other paved surfaces.
Specifications
| Engine | Briggs & Stratton or Tecumseh 5-8 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Unknown gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace worn or damaged parts to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins are designed to protect the auger gearbox from damage. Inspect shear pins frequently and replace them immediately if they are broken. Use only the correct replacement shear pins.
- Fuel Stabilization: Before storing your snow blower for the off-season, add fuel stabilizer to the fuel tank to prevent fuel degradation and carburetor problems. Run the engine for a few minutes to circulate the stabilized fuel.
History & Background
The Murray 1695488 - 18-2863-29 snow blower was introduced as a mid-range option in Murray's snow removal lineup. It aimed to provide reliable two-stage performance at an accessible price point. While no major redesigns occurred during its production run, minor improvements to engine components and drive systems may have been implemented.
Frequently Asked Questions
What engine is in the Murray 1695488 - 18-2863-29?
The Murray 1695488 - 18-2863-29 typically used a Briggs & Stratton or Tecumseh gas engine, ranging from 5 to 8 horsepower. Some models were equipped with an electric start option for easier starting in cold weather.
What is the clearing width of the 1695488 - 18-2863-29?
The clearing width of the Murray 1695488 - 18-2863-29 is typically between 26 and 28 inches, and the intake height is approximately 20-21 inches.
Is the 1695488 - 18-2863-29 a single-stage or two-stage snow blower?
The Murray 1695488 - 18-2863-29 is a two-stage snow blower. It uses an auger to break up and gather the snow, then an impeller to throw the snow through the discharge chute. This two-stage design makes it suitable for handling heavier snowfalls.
What are common parts needed for the 1695488 - 18-2863-29?
Common wear parts for the Murray 1695488 - 18-2863-29 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regularly inspecting and replacing these parts will help keep your snow blower running smoothly.
