{"heroContent":"The Murray LP18976 - 726E snow blower, a popular choice for homeowners during the late 1990s and early 2000s, is a gas-powered, two-stage machine known for its reliability in tackling moderate snowfall. Featuring a standard clearing width for residential use, this model provided a balance of power and maneuverability. It's designed to efficiently clear driveways and walkways with relative ease.","heroImage":null,"expandedContent":"The Murray LP18976 - 726E snow blower was primarily produced in the late 1990s and early 2000s, targeting homeowners needing a dependable snow removal solution. While specific engine details can vary slightly depending on the exact year of manufacture, it typically features a Briggs & Stratton or Tecumseh engine in the 5-6 HP range. Electric start options were available on some models for easier starting in cold weather. As a two-stage snow blower, it utilizes an auger to break up snow and then an impeller to throw it away from the clearing path. The clearing width is generally around 26 inches with an intake height of approximately 20-21 inches, allowing it to handle a decent amount of snow. Throwing distance can reach up to 30 feet depending on snow conditions. It has a wheel drive system with multiple forward speeds and reverse, providing good traction. Chute control is usually manual, allowing the operator to adjust the direction of the snow stream. While it typically does not feature headlights or heated grips, the LP18976 - 726E is well-suited for clearing moderate to heavy snowfalls from driveways, sidewalks, and patios.","specifications":"

Engine	Briggs & Stratton or Tecumseh 5-6 HP Electric Start (Optional)
Stage Type	Two-Stage
Clearing Width	26 inches
Intake Height	21 inches
Throwing Distance	Up to 30 ft
Drive System	Wheel - 4-6 Forward/2 Reverse
Fuel Tank	1.5 gallons
Weight	Approximately 200 lbs
Years Produced	Late 1990s - Early 2000s

","history":"The Murray LP18976 - 726E was introduced as a robust and affordable two-stage snow blower for residential use. It filled a niche for homeowners needing more power than a single-stage but without the expense of larger commercial models. There were no major redesigns during its production run, maintaining a consistent design and feature set.","maintenanceTips":"

Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn parts promptly to maintain optimal performance.
Shear Pin Replacement: Keep extra shear pins on hand and replace them immediately if broken. Use only the manufacturer's specified shear pins to protect the auger gearbox.
Fuel System Maintenance: Use fuel stabilizer during off-season storage to prevent fuel degradation and carburetor clogs. Drain the fuel tank before long-term storage.
Skid Shoe Adjustment: Adjust the skid shoes to maintain proper clearance between the scraper blade and the ground, preventing damage to both the machine and the surface being cleared.

","faqItems":[{"question":"What engine is in the Murray LP18976 - 726E?","answer":"The Murray LP18976 - 726E typically uses a Briggs & Stratton or Tecumseh engine in the 5-6 HP range. Some models may have an electric start option."},{"question":"What is the clearing width of the LP18976 - 726E?","answer":"The Murray LP18976 - 726E has a clearing width of approximately 26 inches and an intake height of about 21 inches."},{"question":"Is the LP18976 - 726E a single-stage or two-stage snow blower?","answer":"The LP18976 - 726E is a two-stage snow blower. It uses an auger to gather and break up the snow, then an impeller throws the snow away from the area."},{"question":"What are common parts needed for the LP18976 - 726E?","answer":"Common wear parts for the LP18976 - 726E include shear pins, belts (auger and drive), scraper bar, skid shoes, spark plugs, and fuel filters."}]}

Lp18976 - 726e

579932 - Belt, Motion Drive