Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Murray LP1695450-1332PE Snow Blower Thrower Parts

Shop Murray LP1695450-1332PE Snow Blower Thrower parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.

The Murray LP1695450 - 1332PE is a robust gas-powered snow blower, likely manufactured in the early 2000s. Featuring a 32-inch clearing width and a two-stage design, it was a popular choice for homeowners needing to clear medium to large driveways and walkways of moderate to heavy snowfall. Its reliable performance and user-friendly design contributed to its widespread adoption.

About the LP1695450 - 1332PE

The Murray LP1695450 - 1332PE snow blower, often referred to as the 1332PE, was a prominent model in Murray's lineup of snow removal equipment. While the exact production years are difficult to pinpoint without specific model year documentation, it was likely produced from the late 1990s through the early to mid 2000s. It typically featured a Briggs & Stratton or Tecumseh engine, likely ranging from 10 to 13 horsepower (hp), or 291cc to 342cc depending on the specific year and sub-model. Many versions offered an electric start option for easy starting in cold weather. As a two-stage snow blower, the LP1695450 - 1332PE uses an auger to break up and collect snow, and then an impeller to forcefully discharge it through the chute. The 32-inch clearing width allows for efficient snow removal across wider areas, and the intake height is typically around 20-21 inches, enabling it to handle deeper snowfalls. Expect a throwing distance of approximately 30-40 feet depending on snow conditions. The drive system is wheel-driven with multiple forward and reverse speeds, providing good traction and maneuverability. The chute is typically controlled manually with a crank or lever, allowing the operator to direct the snow stream. Many models also included a headlight for improved visibility in low-light conditions. This model is well-suited for homeowners and property managers dealing with moderate to heavy snowfall on paved surfaces like driveways, sidewalks, and parking areas.

LP1695450 - 1332PE Specifications

EngineBriggs & Stratton or Tecumseh 10-13 HP / 291cc-342cc Electric Start Option
Stage TypeTwo-Stage
Clearing Width32 inches
Intake Height20-21 inches
Throwing DistanceUp to 40 ft
Drive SystemWheel - Multiple Forward/Reverse
Fuel TankUnknown gallons
WeightUnknown lbs
Years ProducedLate 1990s - Mid 2000s (Estimated)

LP1695450 - 1332PE Maintenance Tips

  • Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage, wear, or bending. Replace damaged parts promptly to maintain optimal snow removal performance.
  • Shear Pin Replacement: Always keep spare shear pins on hand. Replace broken shear pins immediately to prevent damage to the auger gearbox if the auger encounters a hard object.
  • Fuel Stabilizer: Add fuel stabilizer to the fuel tank before storing the snow blower for the off-season. This prevents fuel from degrading and clogging the carburetor.
  • Check Skid Shoes: Adjust the skid shoes to the appropriate height for your surface to prevent damage to the scraper blade and surface being cleared.

LP1695450 - 1332PE History & Background

The Murray LP1695450 - 1332PE was a popular snow blower known for its robust build and effective snow removal capabilities. It solidified Murray's position as a reliable manufacturer of outdoor power equipment for residential use. While not groundbreaking in its design, its combination of power, clearing width, and ease of use made it a sought-after model.

Frequently Asked Questions

Which drive belt is recommended for the Murray LP1695450 - 1332PE snow blower?

For optimal power transmission in your Murray LP1695450 - 1332PE, the 3L310K - Aramid Blue V-Belt (3/8" X 31" ) is a high-quality replacement option.

What replacement V-belt is suitable for the Murray LP1695450 - 1332PE?

The 3L310K - Aramid Blue V-Belt (3/8" X 31" ) provides reliable performance and is a suitable replacement for various belt applications on the Murray LP1695450 - 1332PE.

Are there specific V-belts for the auger or impeller on the Murray LP1695450 - 1332PE?

While specific belt types can vary, the 3L310K - Aramid Blue V-Belt (3/8" X 31" ) is a common replacement belt, often used for either the drive or auger systems, ensuring efficient operation of your two-stage Murray LP1695450 - 1332PE.

What are the most commonly needed replacement belts for the Murray LP1695450 - 1332PE?

Among the frequently replaced wear parts for the Murray LP1695450 - 1332PE, drive and auger belts are common. The 3L310K - Aramid Blue V-Belt (3/8" X 31" ) is a key component to maintain optimal power transmission.

Showing 1-1 of 1 products