Murray LP1695445-522E Snow Blower Thrower Parts
The Murray 522E (LP1695445) is a popular gas-powered, two-stage snow blower often found clearing residential driveways and walkways. Likely manufactured in the late 1990s and early 2000s, this model features a 22-inch clearing width, making it ideal for moderate snowfall. Its two-stage design allows it to handle deeper snow than single-stage models, and it was known for its reliability and ease of use.
The Murray 522E, model number LP1695445, was a widely distributed two-stage snow blower produced during the late 1990s and early 2000s. Power came from a Briggs & Stratton or Tecumseh engine, typically in the 5-6 horsepower range. Many models offered an optional electric start for easier starting in cold weather. The two-stage design utilizes an auger to break up and gather snow, followed by an impeller that throws the snow through the discharge chute. The 522E boasts a 22-inch clearing width and an intake height of around 12-13 inches, allowing it to tackle moderate snowfalls with ease. Throwing distance is generally between 20-30 feet, depending on snow conditions. The wheel drive system provides forward and reverse speeds for easy maneuverability. Manual chute controls allow the operator to adjust the direction of the snow stream. Some models also included a headlight for improved visibility during early morning or evening snow removal. While heated grips weren't a standard feature, the 522E proved capable for homeowners dealing with average snowfall amounts on driveways and walkways. It excels in conditions where the snow is too heavy or deep for a single-stage machine.
Specifications
| Engine | Briggs & Stratton/Tecumseh 5-6 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 22 inches |
| Intake Height | 12-13 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | ~1.5 gallons |
| Weight | ~150 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear or damage. Replace any damaged components to maintain optimal performance.
- Shear Pin Replacement: Keep a supply of shear pins on hand and replace them immediately if broken. Using incorrect shear pins can damage the auger gearbox.
- Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This prevents fuel breakdown and ensures easy starting next winter.
- Skid Shoe Adjustment: Adjust the skid shoes to maintain proper clearance between the scraper blade and the ground. This prevents damage to the scraper blade and helps the snow blower glide smoothly.
History & Background
The Murray 522E (LP1695445) was introduced during a period when two-stage snow blowers were becoming increasingly popular for residential use. It offered a balance of power, clearing width, and affordability, making it a common sight in suburban neighborhoods. While there weren't major redesigns during its production run, minor component updates may have occurred.
Frequently Asked Questions
What engine is in the Murray LP1695445 - 522E?
The Murray LP1695445 - 522E typically uses a Briggs & Stratton or Tecumseh gas engine, ranging from 5 to 6 horsepower. Some models were equipped with an optional electric start.
What is the clearing width of the LP1695445 - 522E?
The Murray LP1695445 - 522E has a clearing width of 22 inches and an intake height of approximately 12-13 inches.
Is the LP1695445 - 522E a single-stage or two-stage snow blower?
The LP1695445 - 522E is a two-stage snow blower. It uses an auger to collect and break up the snow, and then an impeller to throw the snow out of the discharge chute.
What are common parts needed for the LP1695445 - 522E?
Common parts needed for the Murray LP1695445 - 522E include shear pins, belts (auger and drive), scraper bar, skid shoes, spark plugs, and fuel filters.
