Murray LP1695444-726E Snow Blower Thrower Parts
The Murray LP1695444 - 726E is a gas-powered snow thrower designed for residential snow removal. Featuring a 26-inch clearing width and a two-stage design, this model was a popular choice for homeowners seeking a reliable and efficient way to clear driveways and walkways during moderate to heavy snowfall. While the exact years manufactured may vary, it was a common model in the late 1990s and early 2000s.
The Murray LP1695444 - 726E snow thrower was a widely distributed model, primarily targeting homeowners requiring a mid-sized machine for typical suburban snowfalls. While the exact production run is difficult to pinpoint, it was prevalent from the late 1990s into the early 2000s. These models typically featured a Briggs & Stratton or Tecumseh engine in the 6-7 HP range, often with an optional electric start for easier cold-weather starts. As a two-stage snow thrower, the LP1695444 - 726E employs an auger system to break up the snow and then an impeller to throw it away from the cleared area. The auger housing provides a 26-inch clearing width and an intake height of approximately 20-21 inches, enabling it to handle moderate snow depths. Throwing distance could reach up to 30-35 feet, depending on snow conditions. The drive system is typically wheel-driven, offering multiple forward speeds and a reverse speed to enhance maneuverability. Chute controls are usually manual, allowing users to adjust the direction of the discharged snow. Some models included a headlight for improved visibility during early morning or evening snow removal. Given its size and power, the LP1695444 - 726E is best suited for paved driveways, sidewalks, and patios, handling snow depths up to 12 inches effectively.
Specifications
| Engine | Briggs & Stratton or Tecumseh 6-7 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 5-6 Forward/1-2 Reverse |
| Fuel Tank | 1.5 gallons (approximate) |
| Weight | 200 lbs (approximate) |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn or damaged parts promptly.
- Shear Pin Replacement: Keep spare shear pins on hand and replace them immediately if they break to protect the auger gearbox from damage.
- Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and ensure easy starting next season.
- Skid Shoe Adjustment: Adjust the skid shoes to the correct height to prevent damage to the scraper blade and optimize snow removal performance, especially on uneven surfaces.
History & Background
The Murray LP1695444 - 726E snow thrower was introduced as a mid-range option within Murray's snow removal lineup, offering a balance of power and maneuverability for the average homeowner. While there weren't significant redesigns during its production run, minor component updates may have occurred over the years. This model represents a popular segment of snow throwers focused on affordability and practicality.
Frequently Asked Questions
What engine is in the Murray LP1695444 - 726E?
The Murray LP1695444 - 726E typically features a Briggs & Stratton or Tecumseh engine, ranging from 6 to 7 horsepower. An electric start option was sometimes available for easier starting in cold weather.
What is the clearing width of the LP1695444 - 726E?
The Murray LP1695444 - 726E has a clearing width of 26 inches and an intake height of approximately 21 inches, allowing it to handle moderate snow depths effectively.
Is the LP1695444 - 726E a single-stage or two-stage snow blower?
The LP1695444 - 726E is a two-stage snow blower. It utilizes an auger to gather and break up the snow, then an impeller throws the snow away from the machine.
What are common parts needed for the LP1695444 - 726E?
Common replacement parts for the LP1695444 - 726E include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters.
