Murray LP1695442-1130SE Snow Blower Thrower Parts
Murray LP1695442-1130SE Snow Blower Thrower parts in stock. Quality OEM and aftermarket replacement parts with fast shipping and competitive prices.
The Murray LP1695442 - 1130SE is a robust gas-powered snow thrower designed for both residential and commercial use, likely manufactured in the late 1990s and early 2000s. This two-stage snow blower features a powerful engine and a wide 30-inch clearing width, making it a popular choice for tackling moderate to heavy snowfall. Its reliable performance and user-friendly design contributed to its widespread adoption for snow removal tasks.
About the LP1695442 - 1130SE
The Murray LP1695442 - 1130SE snow blower was a popular model known for its dependable performance in handling significant snow accumulations. Although exact production years are difficult to pinpoint without specific documentation, this model was likely available from the late 1990s into the early 2000s. This snow blower is typically powered by a Briggs & Stratton or Tecumseh gas engine, ranging from 10 to 11.5 HP. Many models also featured an electric start option for convenient starting in cold weather. The LP1695442 - 1130SE is a two-stage snow blower, employing an auger to break up the snow and an impeller to discharge it through the chute. This two-stage system allows it to handle heavier, wetter snow more effectively than single-stage models. It offers a 30-inch clearing width and an intake height of approximately 21-23 inches, enabling it to clear substantial amounts of snow in a single pass. The throwing distance can reach up to 30-40 feet, depending on the snow conditions. The drive system is wheel-driven, typically with multiple forward and reverse speeds, providing good maneuverability. Chute control is generally manual, allowing the operator to adjust the direction of the snow discharge. While it may not have features like heated grips or a powerful headlight on all versions, its focus was on solid performance and reliability. The LP1695442 - 1130SE is best suited for areas with moderate to heavy snowfall on driveways and walkways.
LP1695442 - 1130SE Specifications
| Engine | Briggs & Stratton/Tecumseh 10-11.5 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 30 inches |
| Intake Height | 21-23 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Late 1990s - Early 2000s (estimated) |
LP1695442 - 1130SE Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace any damaged components to ensure optimal snow throwing performance.
- Replace Shear Pins: Always have spare shear pins on hand. Replace any broken shear pins immediately to prevent damage to the auger and gearbox.
- Oil Changes and Fuel Stabilizer: Change the engine oil annually or as recommended by the engine manufacturer. Add fuel stabilizer to the fuel tank before storing the snow blower for the off-season to prevent fuel degradation.
- Adjust Skid Shoes: Adjust the skid shoes to the correct height for your surface to prevent damage to the scraper blade and surface being cleared.
LP1695442 - 1130SE History & Background
The Murray LP1695442 - 1130SE was a standard snow blower model produced by Murray, a well-known manufacturer of outdoor power equipment. It gained popularity due to its blend of power, clearing width, and durability. While specific redesigns are difficult to trace without official documentation, the core design remained consistent throughout its production run, focusing on providing a reliable snow removal solution.
Frequently Asked Questions
Which motion drive belt fits the Murray LP1695442 - 1130SE?
The recommended motion drive belt for the Murray LP1695442 - 1130SE is 579932 - Belt, Motion Drive.
What is the correct auger belt for the Murray LP1695442 - 1130SE?
For the Murray LP1695442 - 1130SE, the correct auger belt is 1736421 - Belt, Auger.
What are the indications that the motion drive belt needs replacement on the LP1695442 - 1130SE?
Slippage, a burning rubber smell, or the snow blower not moving forward or backward efficiently can indicate a worn or broken 579932 - Belt, Motion Drive. Inspect the belt regularly for cracks or fraying.
What are common wear parts for the Murray LP1695442 - 1130SE?
For regular maintenance and repair, commonly needed parts for the Murray LP1695442 - 1130SE include the 1736421 - Belt, Auger and the 579932 - Belt, Motion Drive.










