Murray C950-52464-1 Snow Blower Thrower Parts
The Murray C950-52464-1 is a robust gas-powered snow blower, likely manufactured in the late 1990s and early 2000s. This two-stage snow thrower features a clearing width of around 26 inches, making it a popular choice for homeowners needing to clear driveways and walkways quickly and efficiently. Known for its reliable performance and ease of use, the C950-52464-1 provided solid snow removal capabilities.
The Murray C950-52464-1 snow blower was a widely distributed model known for its blend of affordability and performance. While the exact production years are difficult to pinpoint, it was most likely available from the late 1990s through the early 2000s. Typically, these models were equipped with a Tecumseh engine in the 8-10 HP range (specific HP varied depending on the exact year and model configuration) and some offered an optional electric start for easier cold-weather starts. This is a two-stage snow thrower, employing an auger to break up the snow and an impeller to throw it. The clearing width is approximately 26 inches, with an intake height of around 20-21 inches, allowing it to handle moderate snow depths. Throwing distance could reach up to 30-40 feet depending on snow conditions. It typically features a wheel drive system with multiple forward and reverse speeds, allowing for controlled movement in varying snow conditions. The chute rotation is typically manually controlled. While not featuring modern luxuries like heated grips or a headlight, the Murray C950-52464-1 was designed for residential use in areas with moderate to heavy snowfall on paved surfaces.
Specifications
| Engine | Tecumseh 8-10 HP (Approximate) Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20-21 inches (Approximate) |
| Throwing Distance | Up to 40 ft (Approximate) |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | 1.5 Gallons (Approximate) |
| Weight | 200-220 Lbs (Approximate) |
| Years Produced | Late 1990s - Early 2000s (Approximate) |
Maintenance Tips
- Regularly inspect the auger and impeller for damage and wear. Replace any worn or damaged parts to ensure optimal snow throwing performance.
- Check shear pins frequently and replace them immediately if broken. Use only the correct shear pins recommended for the Murray C950-52464-1 to prevent damage to the auger gearbox.
- Change the engine oil annually or after every 25 hours of use, whichever comes first. Use the recommended oil type and viscosity for your engine. Store with fuel stabilizer at the end of the season to prevent fuel degradation.
History & Background
The Murray C950-52464-1 snow blower was introduced as a mid-range option in Murray's snow removal lineup. While it didn't undergo significant redesigns during its production run, minor improvements may have been implemented over the years. This model played a crucial role in providing affordable and reliable snow removal solutions for homeowners across snow-prone regions.
Frequently Asked Questions
What engine is in the Murray C950-52464-1?
The Murray C950-52464-1 typically used a Tecumseh engine, likely in the 8-10 horsepower range. Some models may have had an electric start option.
What is the clearing width of the C950-52464-1?
The clearing width of the Murray C950-52464-1 snow blower is approximately 26 inches. The intake height is around 20-21 inches, allowing it to handle a fair amount of snow depth.
Is the C950-52464-1 a single-stage or two-stage snow blower?
The Murray C950-52464-1 is a two-stage snow blower. It uses an auger to collect and break up the snow, and then an impeller to throw the snow out of the chute.
What are common parts needed for the C950-52464-1?
Common parts needed for the Murray C950-52464-1 include shear pins, drive belts (auger and impeller belts), auger paddles (though less common on two-stage), scraper bar, skid shoes, spark plugs, and fuel filters.
