Murray C950-52430-0 Snow Blower Thrower Parts
The Murray C950-52430-0 is a gas-powered, two-stage snow blower popular for its reliability and ability to handle moderate to heavy snowfall. This model, likely manufactured in the late 1990s and early 2000s, features a wide clearing path, making it a dependable choice for homeowners and property managers needing efficient snow removal. It's clearing width allows for quick snow removal.
The Murray C950-52430-0 snow blower was a popular model known for its robust design and effective snow clearing capabilities. While exact production years are difficult to pinpoint without serial number information, it was likely manufactured between the late 1990s and early 2000s. It's powered by a Briggs & Stratton engine, typically in the 8-10 HP range (specific cc will vary depending on the exact engine model) with an optional electric start for easier cold-weather starts. As a two-stage snow blower, the C950-52430-0 utilizes a powerful auger to break up snow and ice, followed by an impeller that throws the snow through the discharge chute. The clearing width is approximately 26 inches, with an intake height around 20-21 inches, enabling it to handle deeper snowfalls. Throwing distance can reach up to 30-35 feet depending on snow conditions. The drive system is wheel-driven, with multiple forward and reverse speeds, allowing for adjustable speed and maneuverability. The chute rotation is manually controlled. While it may not have features like headlights or heated grips, its reliability and performance made it a favorite for clearing driveways, sidewalks, and small parking lots in areas with moderate to heavy snowfall.
Specifications
| Engine | Briggs & Stratton 8-10 HP (varies) Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 1990s - Early 2000s (estimated) |
Maintenance Tips
- Regularly inspect the auger and impeller for wear and damage. Replace worn or damaged parts to maintain optimal performance.
- Check shear pins regularly and replace them immediately if they are broken. Use only the correct shear pins specified for your model to protect the snow blower from damage.
- Inspect the belts for cracks or fraying and adjust belt tension as needed. Replace belts when worn to prevent slippage and maintain proper operation.
- Change the engine oil according to the manufacturer's recommendations (typically every season or after a certain number of hours). Use fuel stabilizer during off-season storage to prevent fuel degradation and carburetor issues. Adjust the skid shoes to prevent damage to the scraper bar.
History & Background
The Murray C950-52430-0 was introduced as a mid-range snow blower offering a balance of power and affordability. While not a flagship model, it gained popularity due to its reliable Briggs & Stratton engine and effective two-stage snow removal system. This model represents Murray's commitment to providing dependable snow removal solutions for residential use.
Frequently Asked Questions
What engine is in the Murray C950-52430-0?
The Murray C950-52430-0 typically uses a Briggs & Stratton gas engine, with horsepower ranging from 8 to 10 HP depending on the specific sub-model. Some models may have an optional electric start.
What is the clearing width of the C950-52430-0?
The Murray C950-52430-0 has a clearing width of approximately 26 inches, and an intake height of around 21 inches.
Is the C950-52430-0 a single-stage or two-stage snow blower?
The C950-52430-0 is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw the snow out of the chute.
What are common parts needed for the C950-52430-0?
Common wear parts include shear pins, belts (auger and drive belts), auger paddles (if applicable), the scraper bar, skid shoes, spark plugs, and fuel filters. It is always good to keep these items on hand for routine maintenance or repair.
