Murray C950-52421-01 Snow Blower Thrower Parts
The Murray C950-52421-01 is a gas-powered, two-stage snow blower popular for its reliability and efficient snow removal capabilities. It was likely manufactured in the late 1990s/early 2000s and features a [Insert Clearing Width if Known] inch clearing width. Designed for both residential and light commercial use, this model helped solidify Murray's reputation for producing durable and affordable snow removal equipment.
The Murray C950-52421-01 snow blower was a staple in many households during its production run, likely spanning the late 1990s and early 2000s. While exact production dates are difficult to pinpoint without official documentation, its design and features are indicative of this era. Typically, these models would have been powered by a Briggs & Stratton or Tecumseh engine, ranging from 5 to 8 horsepower (HP). Electric start options were commonly available on some configurations. As a two-stage snow blower, the C950-52421-01 utilizes an auger to break up and collect snow, followed by an impeller that throws the snow away from the machine. The clearing width is likely around 24-26 inches, with an intake height capable of handling moderate snowfalls. Expect a throwing distance of up to 30-40 feet depending on snow conditions. The drive system generally consists of wheel drive, offering multiple forward and reverse speeds for maneuverability. Chute controls are typically manual, allowing the operator to adjust the direction and angle of the snow discharge. A headlight may be included for improved visibility during early morning or evening snow removal. The Murray C950-52421-01 is ideally suited for paved driveways and walkways, handling moderate to heavy snowfall depths.
Specifications
| Engine | Briggs & Stratton/Tecumseh 5-8 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches (Estimated) |
| Intake Height | 20-22 inches (Estimated) |
| Throwing Distance | Up to 40 ft (Estimated) |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1-2 Gallons (Estimated) |
| Weight | 150-200 Lbs (Estimated) |
| Years Produced | Late 1990s - Early 2000s (Estimated) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn parts promptly to maintain optimal performance.
- Shear Pin Replacement: Keep spare shear pins on hand. Replace broken shear pins immediately to prevent damage to the auger gearbox. Use only the correct shear pins specified for your model.
- Fuel System Maintenance: Use fuel stabilizer during off-season storage to prevent fuel breakdown and carburetor clogging. Drain the fuel tank before long periods of storage.
- Oil Changes: Change the engine oil according to the manufacturer's recommendations (typically every 25-50 hours of use). Use the correct type and weight of oil specified in the owner's manual.
History & Background
The Murray C950-52421-01 was part of Murray's line of reliable and affordable snow blowers. These models were popular due to their balance of power and ease of use, appealing to a wide range of homeowners. While not a revolutionary design, the C950-52421-01 represented a solid and dependable option in the two-stage snow blower market.
Frequently Asked Questions
What engine is in the Murray C950-52421-01?
The Murray C950-52421-01 likely uses a Briggs & Stratton or Tecumseh engine, typically in the 5 to 8 horsepower range. Some models may have included an electric start option.
What is the clearing width of the C950-52421-01?
The clearing width is estimated to be between 24 and 26 inches, with an intake height around 20 to 22 inches. This allows it to handle moderate snowfalls effectively.
Is the C950-52421-01 a single-stage or two-stage snow blower?
The C950-52421-01 is a two-stage snow blower. It utilizes an auger to gather and break up the snow, and then an impeller to throw the snow through the discharge chute.
What are common parts needed for the C950-52421-01?
Common wear parts include shear pins, drive belts, auger paddles (if equipped), scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts will ensure optimal performance and extend the life of your snow blower.
