Murray C950-52420-0 Snow Blower Thrower Parts
The Murray C950-52420-0 snow blower, likely manufactured in the late 1990s and early 2000s, is a gas-powered, two-stage snow thrower known for its reliability and ease of use. Typically featuring a 24-inch clearing width, it was a popular choice for homeowners looking for a dependable machine to handle moderate snowfall. Its two-stage design made it efficient at clearing packed snow and throwing it a good distance.
The Murray C950-52420-0 snow blower was designed for residential snow removal, offering a balance of power and maneuverability. While exact production years are difficult to pinpoint without specific records, it was prevalent in the late 90s and early 2000s. Typically, this model was equipped with a Briggs & Stratton or Tecumseh engine, delivering around 5-6 horsepower. Electric start options were commonly available, providing convenient starting in cold weather. As a two-stage snow blower, it utilizes an auger to break up the snow and then an impeller to throw it through the chute. The clearing width is generally around 24 inches, with an intake height of approximately 20 inches, allowing it to handle a decent amount of snow. Expect a throwing distance of around 20-30 feet, depending on the snow conditions. The drive system is typically wheel-driven with several forward and reverse speeds, offering good control. Chute controls are usually manual, allowing for easy adjustment of the throwing direction. While features like headlights and heated grips were not standard, some variations may have included a headlight. The C950-52420-0 is well-suited for clearing driveways, walkways, and patios in areas with moderate to heavy snowfall.
Specifications
| Engine | Briggs & Stratton/Tecumseh 5-6 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - 4-6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 180 lbs |
| Years Produced | Late 1990s - Early 2000s (Estimate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace any damaged components immediately to maintain optimal performance.
- Replace Shear Pins: Always have extra shear pins on hand. Replace broken shear pins immediately to protect the auger and transmission from damage.
- Oil Change and Fuel Stabilizer: Perform regular oil changes according to the manufacturer's recommendations. Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel deterioration.
- Adjust Skid Shoes: Adjust the skid shoes to the appropriate height for your surface to prevent damage to the snow blower and the clearing surface.
History & Background
The Murray C950-52420-0 snow blower was a popular model designed for residential use, offering a cost-effective solution for snow removal. While precise details on its introduction and redesigns are limited, it represented a solid, dependable option in the competitive snow blower market. Its popularity stemmed from its combination of decent power, user-friendly operation, and reasonable price point.
Frequently Asked Questions
What engine is in the Murray C950-52420-0?
The Murray C950-52420-0 typically features a Briggs & Stratton or Tecumseh engine with around 5-6 horsepower. An electric start option was often available for added convenience.
What is the clearing width of the C950-52420-0?
The Murray C950-52420-0 has a clearing width of 24 inches and an intake height of approximately 20 inches.
Is the C950-52420-0 a single-stage or two-stage snow blower?
The Murray C950-52420-0 is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw the snow through the chute. This two-stage system allows it to handle heavier, wetter snow more effectively than a single-stage model.
What are common parts needed for the C950-52420-0?
Common wear parts for the Murray C950-52420-0 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts will help keep your snow blower running smoothly.
