Murray C950-52415-0 Snow Blower Thrower Parts
The Murray C950-52415-0 is a popular two-stage gas-powered snow thrower designed for efficient snow removal. This model, likely manufactured in the late 1990s and early 2000s, features a clearing width of around 26 inches, making it suitable for medium to large-sized driveways and walkways. Its robust design and reliable engine contributed to its popularity among homeowners seeking a durable snow removal solution.
The Murray C950-52415-0 snow thrower was a dependable offering from Murray, typically produced in the late 1990s and early 2000s. It's powered by a Briggs & Stratton engine, most commonly a 9 HP or 205cc engine, which provided ample power for tackling moderate to heavy snowfall. Some variations may have included an electric start option for added convenience. As a two-stage snow blower, the C950-52415-0 employs an auger to break up snow and then an impeller to throw it away from the clearing path. The auger typically consists of a serrated steel design to efficiently cut through packed snow and ice. This model usually features a 26-inch clearing width and an intake height of around 20-21 inches, allowing it to handle significant snowfall. Throwing distance is generally up to 30-40 feet, depending on the snow conditions. The drive system is wheel-driven, usually with multiple forward and reverse speeds for enhanced maneuverability. Chute controls are typically manual, allowing the operator to adjust the direction and angle of the snow discharge. While it may not have had features like a headlight or heated grips, the C950-52415-0 was known for its ruggedness and effectiveness in handling various snow conditions, from light powder to wet, heavy snow. It was a great choice for homeowners needing a snowblower for mid-size to larger driveways.
Specifications
| Engine | Briggs & Stratton 9 HP / 205cc (Electric Start Option) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward / 2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect the auger and impeller regularly for damage or wear, replacing any worn or broken parts promptly to maintain optimal performance.
- Always use the correct shear pins and replace them immediately if they break to protect the auger and transmission from damage.
- Check the belt tension periodically and adjust as needed to ensure proper power transfer from the engine to the auger and drive system. Replace belts if cracked or worn.
- Change the engine oil at the recommended intervals (typically annually) to keep the engine running smoothly and extend its lifespan. Use fuel stabilizer when storing the snow blower during the off-season to prevent fuel degradation and carburetor issues.
History & Background
The Murray C950-52415-0 snow thrower was introduced as part of Murray's line of residential snow removal equipment. It was a popular model during its production run, offering a balance of power, features, and affordability. While there weren't major redesigns during its lifespan, it solidified Murray's position in the snow blower market as a reliable option for homeowners.
Frequently Asked Questions
What engine is in the Murray C950-52415-0?
The Murray C950-52415-0 is typically equipped with a Briggs & Stratton engine, often around 9 horsepower or 205cc. Some models may have been available with an electric start option for easier starting in cold weather.
What is the clearing width of the C950-52415-0?
The clearing width of the Murray C950-52415-0 is approximately 26 inches. The intake height is around 21 inches, allowing it to handle moderate to heavy snowfall.
Is the C950-52415-0 a single-stage or two-stage snow blower?
The Murray C950-52415-0 is a two-stage snow blower. This means it uses an auger to collect and break up the snow, and then an impeller to throw the snow out of the discharge chute. This two-stage design allows it to handle heavier snow and throw it farther than a single-stage model.
What are common parts needed for the C950-52415-0?
Common wear parts for the Murray C950-52415-0 include shear pins (for the auger), drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts will help keep your snow blower running smoothly.
