Murray C950-52409-0 Snow Blower Thrower Parts
The Murray C950-52409-0 is a robust gas-powered snow thrower likely manufactured in the late 1990s or early 2000s. This two-stage model offered a substantial clearing width for efficient snow removal and became a popular choice for homeowners due to its reliability and affordability. Its powerful engine and capable auger system made quick work of moderate to heavy snowfall.
The Murray C950-52409-0 snow thrower was a staple in Murray's snow removal lineup, likely produced during the late 1990s and early 2000s. It typically featured a Briggs & Stratton or Tecumseh engine, delivering around 8-10 HP. Electric start was often an available option for easier starting in cold weather. Being a two-stage snow thrower, it utilized an auger to break up the snow and an impeller to throw it. The auger was typically a serrated steel design for effective snow ingestion. The clearing width was generally around 26 inches, with an intake height of about 20-21 inches, allowing it to handle significant snowfall. Throwing distance was typically advertised as up to 30-35 feet, depending on snow conditions. The drive system usually featured wheeled propulsion with multiple forward and reverse speeds, offering good maneuverability. The chute control was typically manual, requiring the operator to physically adjust the direction of the snow stream. While features like headlights and heated grips weren't always standard, some models might have included them. The Murray C950-52409-0 was best suited for medium to large driveways and areas with moderate to heavy snowfall.
Specifications
| Engine | Briggs & Stratton 8 HP, Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 5 Forward/2 Reverse |
| Fuel Tank | Approx. 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace any damaged components to maintain optimal snow throwing performance.
- Shear Pin Replacement: Always keep spare shear pins on hand. If the auger suddenly stops while operating, it's likely a shear pin has broken. Replace it immediately following manufacturer instructions.
- Fuel System Maintenance: Use fuel stabilizer during off-season storage to prevent fuel degradation and carburetor issues. Drain the fuel tank completely before long periods of inactivity.
- Skid Shoe Adjustment: Adjust the skid shoes according to the surface you're clearing (paved, gravel, etc.) to prevent damage to the blower and the ground. Proper adjustment ensures efficient snow removal.
History & Background
The Murray C950-52409-0 was a popular two-stage snow blower introduced during a time when homeowners were increasingly seeking more powerful and efficient snow removal solutions. While not necessarily groundbreaking in design, it offered a reliable and affordable option within the competitive snow blower market, solidifying Murray's presence in the outdoor power equipment sector.
Frequently Asked Questions
What engine is in the Murray C950-52409-0?
The Murray C950-52409-0 typically features a Briggs & Stratton engine with approximately 8 horsepower. Some models may have offered an electric start option.
What is the clearing width of the C950-52409-0?
The clearing width of the Murray C950-52409-0 is approximately 26 inches, with an intake height of around 21 inches.
Is the C950-52409-0 a single-stage or two-stage snow blower?
The Murray C950-52409-0 is a two-stage snow blower. This means it uses an auger to collect and break up the snow, and then an impeller to forcefully discharge the snow through the chute.
What are common parts needed for the C950-52409-0?
Common wear parts for the Murray C950-52409-0 include shear pins, belts (auger and drive), auger paddles/blades, the scraper bar, skid shoes, spark plugs, and fuel filters.
