{"heroContent":"The Murray C950-52313-3 is a robust gas-powered snow thrower, likely manufactured in the late 1990s and early 2000s. Known for its reliable performance and practical design, it typically features a 26-inch clearing width and a two-stage system for efficient snow removal. Its straightforward operation made it a popular choice for homeowners needing a dependable snow removal solution.","heroImage":null,"expandedContent":"The Murray C950-52313-3 snow thrower was a common residential model built to tackle moderate to heavy snowfall. While the exact production years are difficult to pinpoint without official documentation, it was likely available from the late 1990s through the early to mid-2000s. It is powered by a Briggs & Stratton or Tecumseh gas engine, typically ranging from 8 to 10 horsepower, and some models feature an electric start option for easier cold-weather starts. The C950-52313-3 employs a two-stage system; the auger breaks up the snow and feeds it into a high-speed impeller that discharges it through the chute. It offers a clearing width of around 26 inches and an intake height of approximately 20-21 inches, allowing it to handle substantial snow depths. The throwing distance can reach up to 30-40 feet, depending on snow conditions. The drive system is wheel-driven with multiple forward and reverse speeds, providing good traction. Chute rotation is typically manual, offering adjustable direction. A headlight may be included for improved visibility in low-light conditions. This model is well-suited for homeowners dealing with moderate to heavy snowfall on paved driveways and walkways.","specifications":"

Engine	Briggs & Stratton or Tecumseh 8-10 HP Electric Start (Optional)
Stage Type	Two-Stage
Clearing Width	26 inches
Intake Height	21 inches
Throwing Distance	Up to 40 ft
Drive System	Wheel - 4-6 Forward/2 Reverse
Fuel Tank	1.5 gallons
Weight	200 lbs
Years Produced	Late 1990s - Mid 2000s (Estimated)

","history":"The Murray C950-52313-3 snow blower was part of Murray's line of residential snow removal equipment. Introduced to provide a cost-effective solution for homeowners, it offered a balance of power and ease of use. While not revolutionary in design, its dependability and common availability made it a popular choice during its production run.","maintenanceTips":"

Regularly inspect the auger and impeller for any signs of damage or wear, replacing worn or broken parts promptly.
Always use the correct shear pins and replace them immediately if they break to protect the auger gearbox from damage. Carry spares!
Check and adjust belt tension periodically to ensure proper power transmission to the auger and impeller. Replace worn belts to avoid slippage.
Change the engine oil according to the manufacturer's recommendations (typically annually) for optimal engine performance and longevity. Add fuel stabilizer during off-season storage to prevent fuel breakdown.

","faqItems":[{"question":"What engine is in the Murray C950-52313-3?","answer":"The Murray C950-52313-3 is typically equipped with either a Briggs & Stratton or Tecumseh gas engine, ranging from 8 to 10 horsepower. Some models include an electric start option for easier starting in cold weather."},{"question":"What is the clearing width of the C950-52313-3?","answer":"The Murray C950-52313-3 has a clearing width of approximately 26 inches, allowing it to clear a substantial path with each pass. The intake height is around 21 inches, enabling it to handle significant snow depths."},{"question":"Is the C950-52313-3 a single-stage or two-stage snow blower?","answer":"The Murray C950-52313-3 is a two-stage snow blower. This means it uses an auger to break up the snow and then an impeller to throw the snow through the chute. This system is more effective at handling heavier and wetter snow compared to single-stage models."},{"question":"What are common parts needed for the C950-52313-3?","answer":"Common replacement parts for the Murray C950-52313-3 include shear pins (to protect the auger), drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regularly replacing these wear parts will help maintain the snow blower's performance and longevity."}]}

C950-52313-3

585416 - Belt, Bracket Auger Drive