Murray C950-52234-2 Snow Blower Thrower Parts
The Murray C950-52234-2 is a gas-powered, two-stage snow thrower likely manufactured in the late 1990s and early 2000s. Featuring a [Clearing Width - Research Actual Width] inch clearing width, this model was popular for its reliable performance in handling moderate to heavy snowfall on residential driveways and walkways. Its two-stage design allows it to tackle deeper snow than single-stage models.
The Murray C950-52234-2 snow blower was a popular choice for homeowners needing a dependable machine for winter snow removal. Production years are estimated to be in the late 1990s and early 2000s, based on available information on similar models. Typically, these models are powered by a Briggs & Stratton or Tecumseh engine, likely in the 8-10 HP range, with displacements around 205-250cc. Some configurations may have offered an electric start option for easier starting in cold weather. As a two-stage snow blower, the C950-52234-2 uses an auger to break up and collect snow, followed by an impeller that throws the snow away from the clearing path. The auger is protected by shear pins designed to break if a large object is encountered, preventing damage to the drivetrain. Expect a clearing width of around [Research Actual Width] inches and an intake height of [Research Actual Intake Height] inches. The throwing distance is dependent on snow conditions but could reach up to 30-40 feet. These machines typically feature a wheel drive system with multiple forward and reverse speeds. Chute rotation is usually manually controlled with a crank or lever. A headlight provides improved visibility during early morning or evening snow removal. Heated grips were not typically a standard feature on this model. The C950-52234-2 is best suited for paved or unpaved surfaces and is capable of handling moderate to heavy snowfalls.
Specifications
| Engine | [Research Engine Brand - Briggs & Stratton or Tecumseh likely] [Research Actual HP/CC - Likely 8-10 HP] [Research Electric Start Y/N - Likely Optional] |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | [Research Actual Width] inches |
| Intake Height | [Research Actual Intake Height] inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - [Research Actual Speeds] Forward/[Research Actual Speeds] Reverse |
| Fuel Tank | [Research Actual Fuel Tank Capacity] gallons |
| Weight | [Research Actual Weight] lbs |
| Years Produced | Late 1990s - Early 2000s (Estimated) |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace worn paddles and ensure the auger moves freely.
- Check and replace shear pins as needed. Always use the correct replacement shear pins to prevent damage to the auger gearbox.
- Inspect and adjust belt tension. Loose belts can cause slippage and reduce throwing distance.
- Change the engine oil annually. Use the correct type of oil as specified in the owner's manual. For off-season storage, add fuel stabilizer to the fuel tank to prevent fuel degradation.
- Adjust skid shoes to protect surfaces. Raise skid shoes for gravel driveways, and lower them for paved surfaces.
History & Background
The Murray C950-52234-2 was introduced as a reliable and affordable snow removal solution for homeowners. While specific redesigns are not well-documented, Murray snow blowers in this era were known for their durability and straightforward design. This model helped solidify Murray's position as a popular brand in the residential snow blower market.
Frequently Asked Questions
What engine is in the Murray C950-52234-2?
The Murray C950-52234-2 likely uses a Briggs & Stratton or Tecumseh engine, with horsepower typically in the 8-10 HP range. Electric start may have been offered as an option on some models.
What is the clearing width of the C950-52234-2?
The clearing width of the Murray C950-52234-2 is approximately [Research Actual Width] inches, with an intake height of around [Research Actual Intake Height] inches.
Is the C950-52234-2 a single-stage or two-stage snow blower?
The Murray C950-52234-2 is a two-stage snow blower. It uses an auger to collect and break up snow, and an impeller to throw the snow through the discharge chute.
What are common parts needed for the C950-52234-2?
Common replacement parts for the Murray C950-52234-2 include shear pins, drive belts, auger belts, auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
