Murray 633136X85A Snow Blower Thrower Parts
The Murray 633136X85A is a gas-powered, two-stage snow thrower designed for both residential and light commercial use, likely manufactured in the early to mid 2000s. Known for its solid performance and reliable engine, this model typically features a clearing width around 26 inches, making it a popular choice for homeowners needing to clear driveways and walkways of moderate to heavy snowfall.
The Murray 633136X85A snow thrower was a popular model known for its blend of power and affordability. While exact production years can vary, it was likely offered during the early to mid-2000s. This model typically featured a Briggs & Stratton engine, providing around 8-10 HP, though engine sizes could vary. Some versions may have offered an optional electric start for easier cold-weather starts. As a two-stage snow blower, it employs a robust auger to break up snow and then an impeller to throw it away from the clearing path. Typical clearing widths ranged from 26 to 28 inches, with an intake height of approximately 20-21 inches. This combination allowed it to handle moderate to heavy snowfalls efficiently. The throwing distance could reach up to 30-40 feet, depending on the snow conditions. It features a wheel-driven system with multiple forward and reverse speeds, providing good traction and maneuverability. The chute control is usually manual, allowing the operator to adjust the direction of the snow stream. A headlight is often included for improved visibility during early morning or evening snow removal. While heated grips were not a standard feature, the 633136X85A is ideally suited for clearing driveways, walkways, and patios in areas with moderate to heavy snowfall.
Specifications
| Engine | Briggs & Stratton 8-10 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Early to Mid 2000s (Estimate) |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace worn or damaged parts promptly to maintain optimal performance.
- Check and replace shear pins as needed. Shear pins protect the auger gearbox from damage if the auger encounters a hard object. Keep extra shear pins on hand.
- Inspect belt tension and condition. Loose or worn belts can reduce the snow blower's throwing power. Adjust or replace belts as necessary.
- Use fuel stabilizer during off-season storage. This will prevent fuel from degrading and causing starting problems in the next winter season. Perform regular oil changes.
History & Background
The Murray 633136X85A snow thrower was part of Murray's lineup of reliable and affordable snow removal equipment. It was introduced as a mid-range model offering a good balance of power and features for homeowners. While no major redesigns are documented for this specific model number, Murray frequently updated its snow blower lineup with incremental improvements and feature enhancements throughout the years.
Frequently Asked Questions
What engine is in the Murray 633136X85A?
The Murray 633136X85A typically uses a Briggs & Stratton gas engine, ranging from 8 to 10 horsepower. Some models may have an optional electric start.
What is the clearing width of the 633136X85A?
The clearing width of the Murray 633136X85A is approximately 26 inches, with an intake height of around 21 inches.
Is the 633136X85A a single-stage or two-stage snow blower?
The Murray 633136X85A is a two-stage snow blower. It uses an auger to collect and break up the snow, and then an impeller to throw the snow out of the chute.
What are common parts needed for the 633136X85A?
Common parts needed for the Murray 633136X85A include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters.
