Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Murray 633128X43A Snow Blower Thrower Parts

Replacement parts for the Murray 633128X43A Snow Blower Thrower. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.

The Murray 633128X43A is a gas-powered, two-stage snow thrower designed for both residential and light commercial use, typically manufactured in the early to mid-2000s. This model features a decent clearing width, offering a balance of power and maneuverability for tackling moderate snowfall. Its robust engine and effective two-stage system made it a popular choice for homeowners needing a reliable snow removal solution.

About the 633128X43A

The Murray 633128X43A snow thrower was a common sight in suburban driveways during its production run. While exact specifications can vary slightly, the 633128X43A generally featured a Briggs & Stratton engine, offering around 8-10 horsepower (check your specific model for exact HP). An electric start option was frequently available, providing convenient starting in cold weather. Being a two-stage model, it utilizes an auger to break up the snow and then an impeller to throw it. Expect a clearing width around 26 inches and an intake height of approximately 20-21 inches, allowing it to handle moderate snow depths. It could typically throw snow up to 30-40 feet. The drive system is wheel-driven, usually offering multiple forward speeds and reverse. Chute controls are generally manual, allowing for directional snow discharge. While it may not have included a headlight or heated grips, this model was a solid performer for homeowners dealing with moderate snow accumulations on driveways and sidewalks. It's best suited for paved surfaces and can handle snowfalls from a few inches up to a foot or more.

633128X43A Specifications

EngineBriggs & Stratton 8-10 HP (Verify Specific Model) Electric Start (Optional)
Stage TypeTwo-Stage
Clearing Width26 inches
Intake Height21 inches
Throwing DistanceUp to 40 ft
Drive SystemWheel - Multiple Forward/Reverse
Fuel Tank1.5 gallons (Approximate)
Weight200 lbs (Approximate)
Years ProducedEarly to Mid-2000s (Approximate)

633128X43A Maintenance Tips

  • Regularly inspect the auger and impeller for damage and wear. Replace worn parts promptly to maintain optimal performance.
  • Always use the correct shear pins and keep spares on hand. Improper shear pins can damage the auger gearbox.
  • Check and adjust belt tension periodically. Loose belts can cause slippage and reduced throwing distance.
  • Before storing the snow blower for the off-season, drain the fuel or add fuel stabilizer to prevent gumming and carburetor issues. Also, change the oil per the manufacturer's recommendation.

633128X43A History & Background

The Murray 633128X43A was introduced as a reliable and affordable two-stage snow thrower option for homeowners. It represented Murray's commitment to providing accessible snow removal equipment. While not revolutionary in design, it was a popular and well-regarded machine for its time.

Frequently Asked Questions

Which drive belt fits the Murray 633128X43A snow blower?

For the Murray 633128X43A, a suitable drive belt replacement is the A37K - Aramid Blue V-Belt. This durable 1/2" X 39" belt is designed for reliable power transmission in cold conditions.

What auger belt is recommended for the Murray 633128X43A?

The recommended auger belt for the Murray 633128X43A is the 3L340K - Aramid Blue V-Belt. This 3/8" X 34" belt provides efficient power to the auger system for effective snow clearing.

What types of V-belts are commonly replaced on the Murray 633128X43A?

Commonly replaced V-belts for the Murray 633128X43A include the A37K - Aramid Blue V-Belt (1/2" X 39") and the 3L340K - Aramid Blue V-Belt (3/8" X 34"). These specific belts are essential for optimal snow blower performance.

What are common parts needed for the 633128X43A?

Common replacement parts for the Murray 633128X43A snow blower include essential V-belts. Consider the A37K - Aramid Blue V-Belt (1/2" X 39") for drive systems, and the 3L340K - Aramid Blue V-Belt (3/8" X 34") for auger or other pulley systems. Regularly inspecting and replacing these belts ensures reliable operation during heavy snowfalls.

Showing 1-2 of 2 products