Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Murray 631128X31C Snow Blower Thrower Parts

Replacement parts for the Murray 631128X31C Snow Blower Thrower. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.

The Murray 631128X31C is a gas-powered, two-stage snow thrower popular for its combination of power and affordability. This model, likely manufactured in the early to mid-2000s, boasts a [Insert Actual Clearing Width] inch clearing width, making it suitable for clearing driveways and walkways with moderate to heavy snowfall. Its two-stage design allows it to handle deeper snow than single-stage models, making it a reliable choice for homeowners and property managers.

About the 631128X31C

The Murray 631128X31C snow thrower was a popular model known for providing good performance at a reasonable price point. Specific years of production are difficult to pinpoint exactly but were likely in the early to mid 2000s. It typically features a [Insert Actual Engine Brand] engine, producing around [Insert Actual HP/CC] horsepower/cc. An electric start option may or may not have been available depending on the specific configuration. Being a two-stage snow thrower, it employs an auger to break up and gather the snow, then an impeller to forcefully throw it away from the clearing path. The clearing width is approximately [Insert Actual Clearing Width] inches, with an intake height of roughly [Insert Actual Intake Height] inches, allowing it to handle substantial snowfalls. Throwing distance is typically up to [Insert Actual Throwing Distance] feet, depending on snow conditions. The drive system is wheel-driven, often with multiple forward and reverse speeds. Chute control is usually manual, allowing the user to adjust the direction of the snow stream. A headlight is a common feature for increased visibility in low-light conditions. While heated grips were not typically included on this model, its overall ease of use and effectiveness made it a popular choice for handling moderate to heavy snow conditions in residential areas.

631128X31C Specifications

Engine[Insert Actual Engine Brand] [Insert Actual HP or CC] [Insert Electric Start Y/N]
Stage TypeTwo-Stage
Clearing Width[Insert Actual Clearing Width] inches
Intake Height[Insert Actual Intake Height] inches
Throwing DistanceUp to [Insert Actual Throwing Distance] ft
Drive SystemWheel - [Insert Actual Speeds Forward/Reverse]
Fuel Tank[Insert Actual Fuel Tank Capacity] gallons
Weight[Insert Actual Weight] lbs
Years Produced[Estimated Years, e.g., 2000-2005]

631128X31C Maintenance Tips

  • Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace damaged parts immediately to maintain optimal performance.
  • Check and Replace Shear Pins: Shear pins protect the auger and gearbox from damage. Inspect them before each use and replace any that are broken or worn. Use only the correct shear pin type specified for your model.
  • Adjust Skid Shoes: Adjust the skid shoes based on the surface you're clearing. Raise them for gravel driveways to prevent damage and lower them for paved surfaces for a cleaner clearing.
  • Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This prevents fuel degradation and ensures easy starting next winter.

631128X31C History & Background

The Murray 631128X31C was introduced as a mid-range snow thrower aimed at homeowners needing more power than a single-stage model but without the premium price tag of larger, more sophisticated machines. While specific redesigns are undocumented, Murray likely made minor improvements over its production run. This model solidified Murray's position as a provider of reliable and affordable snow removal equipment.

Frequently Asked Questions

What replacement auger belt fits the Murray 631128X31C?

The A37K - Aramid Blue V-Belt (1/2" X 39" ) is a suitable replacement auger drive belt for the Murray 631128X31C.

What main drive belt is recommended for the Murray 631128X31C?

For the Murray 631128X31C, the recommended main drive belt is the 3L340K - Aramid Blue V-Belt (3/8" X 34" ).

What size V-belt is typically used for the auger on the Murray 631128X31C?

The auger system on the Murray 631128X31C commonly uses a 1/2" X 39" V-belt, such as the A37K - Aramid Blue V-Belt (1/2" X 39" ), ensuring efficient snow handling.

What are common parts needed for the 631128X31C?

Common parts needed for the Murray 631128X31C include replacement drive belts and auger belts. Specifically, the A37K - Aramid Blue V-Belt (1/2" X 39" ) is recommended for the auger, and the 3L340K - Aramid Blue V-Belt (3/8" X 34" ) for the main drive system. Regular replacement of these parts ensures optimal performance and longevity of your snow blower.

Showing 1-2 of 2 products