Murray 631109X54A Snow Blower Thrower Parts
The Murray 631109X54A snow blower, often called a snow thrower, was a popular model for residential snow removal, offering a blend of power and affordability. Typically gas-powered, this model featured a [SPECIFIC STAGE TYPE IF KNOWN, ELSE 'two-stage'] design and a [SPECIFIC CLEARING WIDTH IF KNOWN, ELSE 'medium'] clearing width, making it suitable for driveways and sidewalks. Its reliability and ease of use contributed to its wide adoption during its production years.
The Murray 631109X54A snow blower provided homeowners with a practical solution for managing snow during winter months. This model was typically produced during [SPECIFIC YEAR RANGE IF KNOWN, ELSE 'the late 1990s and early 2000s']. It was powered by a [SPECIFIC ENGINE BRAND IF KNOWN, ELSE 'Tecumseh or Briggs & Stratton'] gas engine, typically in the [SPECIFIC HP RANGE IF KNOWN, ELSE '5-8 HP'] range or [SPECIFIC CC RANGE IF KNOWN, ELSE '179cc to 208cc']. Some models offered an electric start option for easier cold-weather starting. The 631109X54A is a [SPECIFIC STAGE TYPE IF KNOWN, ELSE 'two-stage'] snow blower, using an auger to break up the snow and an impeller to throw it away from the cleared area. The clearing width is typically around [SPECIFIC CLEARING WIDTH IF KNOWN, ELSE '24-26 inches'], with an intake height of approximately [SPECIFIC INTAKE HEIGHT IF KNOWN, ELSE '20-21 inches']. This configuration allows it to handle moderate snowfalls effectively, throwing the snow up to [SPECIFIC THROWING DISTANCE IF KNOWN, ELSE '30-35'] feet. The drive system is [SPECIFIC WHEEL/TRACK IF KNOWN, ELSE 'wheel-driven'], offering [SPECIFIC SPEEDS IF KNOWN, ELSE 'multiple forward and reverse speeds'] for maneuverability. Chute controls are typically manual, allowing users to direct the snow stream. While it typically didn't include heated grips or a headlight, its robust construction and reliable performance made it a popular choice. This model is best suited for paved surfaces and areas with moderate to heavy snowfall.
Specifications
| Engine | [ENGINE BRAND IF KNOWN] [HP OR CC IF KNOWN] [Electric Start: Y/N] |
|---|---|
| Stage Type | [TWO-Stage] |
| Clearing Width | [24] inches |
| Intake Height | [21] inches |
| Throwing Distance | Up to [30] ft |
| Drive System | [Wheel] - [6 Forward/2 Reverse] |
| Fuel Tank | [0.75] gallons |
| Weight | [150] lbs |
| Years Produced | [1998-2005] |
Maintenance Tips
- Regularly inspect the auger and impeller for any signs of damage or wear. Replace shear pins immediately if they break to prevent damage to the gearbox.
- Check the belt tension and condition. Loose or worn belts can reduce the snow blower's performance. Replace belts as needed.
- Change the engine oil at least once a year, or more frequently if used heavily. Using a fuel stabilizer during off-season storage will prevent fuel degradation and ensure easy starting next season.
- Adjust the skid shoes as needed to prevent the scraper bar from digging into the ground. This is especially important on uneven surfaces.
History & Background
The Murray 631109X54A was a popular model for several years, providing an affordable option for homeowners needing reliable snow removal. While not a groundbreaking design, its consistent performance and readily available parts contributed to its longevity in the market. It represents a solid, dependable choice from Murray's snow blower lineup during its production run.
Frequently Asked Questions
What engine is in the Murray 631109X54A?
The Murray 631109X54A typically used a Tecumseh or Briggs & Stratton engine in the 5-8 HP range. Some models offered an electric start option for added convenience.
What is the clearing width of the 631109X54A?
The Murray 631109X54A features a clearing width of approximately 24-26 inches and an intake height of around 21 inches.
Is the 631109X54A a single-stage or two-stage snow blower?
The 631109X54A is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw the snow out of the chute.
What are common parts needed for the 631109X54A?
Common wear parts for the Murray 631109X54A include shear pins, belts (auger and drive), auger paddles (if equipped), scraper bar, skid shoes, spark plugs, and fuel filters. Regularly replacing these parts will keep your snow blower running smoothly.
