Murray 629904X85B Snow Blower Thrower Parts
Murray 629904X85B Snow Blower Thrower parts in stock. Quality OEM and aftermarket replacement parts with fast shipping and competitive prices.
The Murray 629904X85B snow blower is a robust machine designed for both residential and light commercial use, likely manufactured in the late 2000s and early 2010s. Typically powered by a gasoline engine and featuring a 26-inch clearing width, this two-stage snow thrower gained popularity for its balance of power, maneuverability, and reliability in tackling moderate to heavy snowfall. Its two-stage design allows it to chew through snow efficiently and throw it a considerable distance.
About the 629904X85B
The Murray 629904X85B is a two-stage snow blower built for handling moderate to heavy snowfall on driveways, walkways, and small parking lots. While the exact production years are difficult to pinpoint without further research (e.g., reviewing serial number databases), it's safe to assume it was manufactured sometime in the late 2000s to early 2010s. It's commonly equipped with a Briggs & Stratton engine (5-7 HP, around 190-205cc) and an electric start option for easier starts in cold weather. The two-stage system uses an auger to break up the snow and then an impeller to throw the snow through the chute. Expect a clearing width of around 26 inches and an intake height of approximately 20 inches, allowing it to handle deep drifts. Throwing distances can reach up to 30-40 feet depending on snow conditions. The drive system is typically wheel-driven, with multiple forward and reverse speeds for easy maneuvering. The chute control is usually manual, allowing the operator to adjust the direction and angle of the snow stream. A headlight provides enhanced visibility in low-light conditions. This model is ideally suited for homeowners and small businesses in areas with moderate to heavy snowfall, where a balance of power and maneuverability is needed. While heated grips were not a common feature on this model, its sturdy construction and efficient snow-clearing capabilities made it a popular choice.
629904X85B Specifications
| Engine | Briggs & Stratton 190cc Electric Start (Likely Option) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.6 gallons |
| Weight | Approximately 180 lbs |
| Years Produced | Late 2000s - Early 2010s |
629904X85B Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn parts to maintain optimal snow throwing performance.
- Shear Pin Replacement: Keep extra shear pins on hand and replace them immediately if broken. Using incorrect shear pins can damage the auger gearbox.
- Oil Changes and Fuel Stabilizer: Change the engine oil annually and add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Check and Adjust Skid Shoes: Periodically inspect and adjust the skid shoes to prevent damage to the scraper bar and to optimize the snow blower's performance on different surfaces.
629904X85B History & Background
The Murray 629904X85B snow blower was introduced as a mid-range offering in Murray's snow removal lineup, aiming to provide a balance of power and affordability. While not revolutionary in its design, it represented a solid, reliable option for homeowners needing a dependable snow blower. There were no major redesigns during its production run, focusing instead on maintaining its robust performance.
Frequently Asked Questions
Which motion drive belt fits the Murray 629904X85B?
The correct motion drive belt for the Murray 629904X85B snow blower is the 579932 - Belt, Motion Drive.
What auger drive belt is compatible with the Murray 629904X85B?
For the Murray 629904X85B, the recommended auger drive belt is the 585416 - Belt, Bracket Auger Drive.
Is the CC13992 belt a suitable replacement for the Murray 629904X85B?
Yes, the 579932 - Belt, Motion Drive is an ideal replacement for the CC13992 belt and is designed for the Murray 629904X85B.
What are common parts needed for the Murray 629904X85B?
Key wear parts for the Murray 629904X85B include the 579932 - Belt, Motion Drive and the 585416 - Belt, Bracket Auger Drive. Having these essential belts on hand helps ensure minimal downtime during snow removal.










