Murray 629118X43B Snow Blower Thrower Parts
The Murray 629118X43B is a two-stage gas-powered snow blower commonly used in residential settings for clearing driveways and walkways. Known for its dependable performance, this model, produced in the late 2000s and early 2010s, typically features a 26-inch clearing width. Its two-stage design allows it to handle moderate to heavy snowfall efficiently, making it a popular choice for homeowners in snowy climates.
The Murray 629118X43B snow blower was manufactured from approximately 2007 to 2012 and quickly became a recognized option for homeowners needing a reliable snow removal solution. It’s powered by a Briggs & Stratton engine, typically around 8.5 to 9 horsepower or approximately 205cc to 250cc, with an electric start option on some models. This is a two-stage snow blower; the auger system consists of a serrated steel auger that breaks up the snow and feeds it into a high-speed impeller. The impeller then throws the snow through the discharge chute. The 629118X43B offers a 26-inch clearing width and an intake height of approximately 20 inches. Depending on the snow conditions and engine performance, it can throw snow up to 30-35 feet. The drive system uses a wheel drive with multiple forward and reverse speeds, offering good maneuverability. Chute control is typically manual, allowing the user to adjust the direction and angle of the snow discharge. Many models included a headlight for improved visibility during early morning or evening snow removal. While heated grips weren't standard, the machine excels in moderate to heavy snowfall on paved surfaces. It's well-suited for driveways, walkways, and patios.
Specifications
| Engine | Briggs & Stratton 9 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 6 Forward / 2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | 2007-2012 (Approximate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn or damaged parts promptly to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins protect the auger gearbox from damage if the auger hits a hard object. Inspect them frequently and replace any that are broken or sheared. Keep spares on hand.
- Use Fuel Stabilizer: Before storing the snow blower for the off-season, add fuel stabilizer to the gas tank to prevent fuel degradation and carburetor issues. Run the engine for a few minutes to ensure the stabilizer circulates through the fuel system.
- Adjust Skid Shoes: Adjust the skid shoes to the correct height for your surface type (paved or gravel). This prevents damage to the blower and the surface you're clearing.
History & Background
The Murray 629118X43B was introduced as part of Murray's line of mid-sized, two-stage snow blowers aimed at the residential market. While there weren't major redesigns during its production run, minor improvements to the engine and controls were implemented over the years. It played a significant role in providing homeowners with an affordable and effective snow removal solution.
Frequently Asked Questions
What engine is in the Murray 629118X43B?
The Murray 629118X43B is typically powered by a Briggs & Stratton engine, usually around 9 HP or approximately 205cc to 250cc. Some models come with an electric start option for easier starting in cold weather.
What is the clearing width of the 629118X43B?
The Murray 629118X43B has a clearing width of 26 inches, allowing it to efficiently clear a path through moderate to heavy snow. The intake height is approximately 20 inches.
Is the 629118X43B a single-stage or two-stage snow blower?
The Murray 629118X43B is a two-stage snow blower. This means it uses an auger to collect the snow and then an impeller to throw the snow through the discharge chute. The two-stage design makes it effective at handling deeper and heavier snow than a single-stage model.
What are common parts needed for the 629118X43B?
Common parts needed for the Murray 629118X43B include shear pins, drive belts (auger and impeller belts), scraper bar, skid shoes, spark plugs, and fuel filters. Auger paddles, while not as common, may also need replacement over time due to wear.
