Murray 629118X31A Snow Blower Thrower Parts
The Murray 629118X31A is a gas-powered, two-stage snow blower designed for efficient snow removal on both residential and commercial properties. While specific manufacturing years may vary, this model typically features a generous clearing width around 26-28 inches, making it a popular choice for tackling moderate to heavy snowfall. Its robust two-stage design allows it to handle a variety of snow conditions, from light powder to heavier, wetter snow.
The Murray 629118X31A snow blower, while possibly manufactured across a range of years, represented a solid option in the residential and light commercial snow removal market. Typically powered by a Briggs & Stratton or similar engine ranging from 8-10 HP (approximately 205-250cc), some versions might have offered an electric start option for easier starting in cold conditions. As a two-stage snow blower, it employs an auger to break up the snow and then an impeller to throw it away from the cleared area. The clearing width typically falls between 26 and 28 inches, with an intake height of around 20-21 inches, allowing it to handle significant snow depths. The throwing distance can reach up to 30-40 feet depending on snow conditions and engine power. It commonly uses a wheel drive system with multiple forward and reverse speeds, controlled by levers near the handle. The chute is usually manually controlled, requiring the operator to adjust the direction by hand. While headlight and heated grips are not standard, some variants may be equipped with one or both. This snow blower is ideally suited for homeowners and property managers dealing with moderate to heavy snowfall on driveways, sidewalks, and smaller parking lots. Its two-stage design is effective in both light and heavier, wetter snow conditions.
Specifications
| Engine | Briggs & Stratton 205cc-250cc, Electric Start Possible |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 180-200 Lbs |
| Years Produced | Likely Late 1990s - Mid 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged parts to maintain optimal snow-throwing performance.
- Shear Pin Replacement: Keep extra shear pins on hand and replace them immediately if broken. Using the correct shear pins is crucial to protect the auger and gearbox from damage.
- Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This will prevent fuel degradation and ensure easier starting when you need it next winter.
- Skid Shoe Adjustment: Adjust the skid shoes according to the surface you are clearing. Raise them for gravel or uneven surfaces to prevent damage to the snow blower and lower them for paved surfaces for a cleaner snow removal.
History & Background
The Murray 629118X31A snow blower was likely introduced in the late 1990s or early 2000s as a mid-range model within Murray's snow removal equipment lineup. It aimed to provide a balance of power, clearing width, and affordability for homeowners facing significant snowfalls. While specific updates are difficult to pinpoint without exact year of manufacture, common redesigns typically involved engine upgrades or minor improvements to the chute control mechanism.
Frequently Asked Questions
What engine is in the Murray 629118X31A?
The Murray 629118X31A is typically equipped with a Briggs & Stratton engine, most likely in the 205cc to 250cc range. Some models may have an electric start option for easier cold-weather starting.
What is the clearing width of the 629118X31A?
The Murray 629118X31A has a clearing width of approximately 26 to 28 inches and an intake height of around 20 to 21 inches.
Is the 629118X31A a single-stage or two-stage snow blower?
The Murray 629118X31A is a two-stage snow blower. It uses an auger to gather and break up the snow, and then an impeller to forcefully discharge it through the chute.
What are common parts needed for the 629118X31A?
Common wear parts for the Murray 629118X31A include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
