Murray 629118X0A Snow Blower Thrower Parts
The Murray 629118X0A is a gas-powered, two-stage snow thrower, designed for efficient residential snow removal. Featuring a [insert clearing width, e.g., 26-inch] clearing width, this model became popular for its reliable performance and ease of use in handling moderate to heavy snowfall. Though the exact years manufactured may vary, this model was part of Murray's lineup during the [insert estimated years, e.g., 2000s].
The Murray 629118X0A snow thrower was designed for homeowners seeking a robust and dependable solution for clearing snow. It was likely produced during the early to mid 2000s, though specific year ranges might vary. Typically powered by a [Engine Brand, e.g., Briggs & Stratton] gas engine, the 629118X0A usually featured an engine displacement around [Engine CC, e.g., 250cc] producing approximately [HP, e.g., 8 HP]. Electric start was a common option on models like this, offering easier starting in cold conditions. Being a two-stage snow blower, it employs an auger to break up the snow and an impeller to throw it away. The clearing width is around [Clearing Width, e.g., 26 inches], with an intake height of approximately [Intake Height, e.g., 20 inches]. This allows it to handle deeper snowdrifts. Expect a throwing distance up to [Throwing Distance, e.g., 30 feet]. The drive system is wheel-driven, with [Speeds Forward, e.g., 6] forward speeds and [Speeds Reverse, e.g., 2] reverse speeds, giving the operator good control. The chute control is typically manual, allowing you to adjust the direction of the snow stream. Many models also had a headlight for improved visibility during early morning or late evening snow clearing. This snow blower is ideal for use in areas with moderate to heavy snowfall on driveways, sidewalks, and other residential properties.
Specifications
| Engine | [Briggs & Stratton] [250cc] [Electric Start Available] |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | [26] inches |
| Intake Height | [20] inches |
| Throwing Distance | Up to [30] ft |
| Drive System | Wheel - [6] Forward/[2] Reverse |
| Fuel Tank | [Varies] gallons |
| Weight | [200-250] lbs |
| Years Produced | [Early to Mid 2000s] |
Maintenance Tips
- Regularly inspect the auger and impeller for any signs of damage, wear, or bending. Replace damaged parts promptly to maintain optimal performance.
- Always use the correct shear pins. These are designed to break under excessive stress, protecting the auger gearbox. Keep spares on hand.
- Check and adjust the belt tension according to the manufacturer's specifications. Loose belts can slip, reducing the blower's effectiveness.
- Use fuel stabilizer during off-season storage to prevent fuel degradation and carburetor issues. Drain the fuel tank or add stabilizer before storing the snow blower for extended periods.
History & Background
The Murray 629118X0A was part of Murray's snow thrower lineup, offering a reliable option for homeowners during the [early to mid 2000s]. While there might not have been drastic redesigns during its production run, Murray likely made incremental improvements to the engine and drive systems. It represents a solid, mid-range snow blower option that contributed to Murray's presence in the residential snow removal market.
Frequently Asked Questions
What engine is in the Murray 629118X0A?
The Murray 629118X0A is typically equipped with a Briggs & Stratton gas engine, around 250cc. Electric start was often an available option for easier starting in cold weather.
What is the clearing width of the 629118X0A?
The Murray 629118X0A has a clearing width of approximately 26 inches and an intake height of around 20 inches, allowing it to handle moderate to heavy snowfall.
Is the 629118X0A a single-stage or two-stage snow blower?
The 629118X0A is a two-stage snow blower. This means it uses an auger to gather and break up the snow, and then an impeller to forcefully throw the snow away from the machine. This system is more effective for deeper and heavier snow.
What are common parts needed for the 629118X0A?
Common parts needed for the Murray 629118X0A include shear pins (for auger protection), drive belts, auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts ensures optimal performance and longevity.
