Murray 629109X54A Snow Blower Thrower Parts
The Murray 629109X54A is a gas-powered, two-stage snow thrower designed for efficient snow removal in residential and commercial settings. Typically manufactured in the early to mid 2000s, it features a generous clearing width and robust auger system. This model gained popularity for its reliable performance and ability to handle moderate to heavy snowfall.
The Murray 629109X54A snow thrower was a popular model known for its affordability and functionality. It was produced in the early to mid-2000s. The engine is typically a Briggs & Stratton or Tecumseh engine, ranging from 5-8 HP, depending on the specific year and configuration. Some models may have offered an optional electric start for ease of use in cold weather. This is a two-stage snow blower, meaning it uses an auger to gather snow and an impeller to throw it further. The serrated steel auger efficiently breaks up packed snow and ice. The clearing width is approximately 26 inches, with an intake height of around 20 inches, allowing it to handle significant snow depths. It's capable of throwing snow up to 30-40 feet, depending on conditions. The drive system is wheel-driven, usually offering multiple forward speeds and a reverse speed for maneuverability. Chute controls are typically manual, allowing the operator to adjust the direction and angle of the snow stream. Some models may feature a headlight for improved visibility in low-light conditions. While not equipped with heated grips, its reliable performance and reasonable price point made it a popular choice for homeowners and property managers dealing with moderate to heavy snow accumulations. Ideal for driveways, sidewalks, and smaller parking lots.
Specifications
| Engine | Briggs & Stratton/Tecumseh 5-8 HP Electric Start Option |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | 200 lbs |
| Years Produced | Early to Mid 2000s |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace worn or damaged parts promptly to maintain optimal performance.
- Always use the correct type of shear pins and replace them immediately if they break to prevent damage to the auger gearbox.
- Check the belt tension regularly and adjust as needed. Replace worn or cracked belts to ensure proper power transmission to the auger and impeller.
- Change the engine oil according to the manufacturer's recommendations. Using a fuel stabilizer during off-season storage can help prevent fuel-related issues. Adjust the skid shoes to maintain the correct clearance and prevent damage to the scraper bar and your driveway.
History & Background
The Murray 629109X54A was introduced as a mid-range snow blower option within the Murray lineup. While not a flagship model, it provided a balance of power, features, and affordability. There were no major redesigns during its production run, focusing on consistent and reliable performance.
Frequently Asked Questions
What engine is in the Murray 629109X54A?
The Murray 629109X54A typically uses a Briggs & Stratton or Tecumseh engine. Horsepower ranges from 5 to 8 HP, depending on the specific year and model variation. Some models offer an optional electric start for easier starting in cold weather.
What is the clearing width of the 629109X54A?
The Murray 629109X54A has a clearing width of approximately 26 inches and an intake height of around 20 inches.
Is the 629109X54A a single-stage or two-stage snow blower?
The Murray 629109X54A is a two-stage snow blower. It utilizes a robust auger to collect and break up the snow, and then an impeller to forcefully discharge the snow through the chute.
What are common parts needed for the 629109X54A?
Common replacement parts for the Murray 629109X54A include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters.
